Roland V-4EX, Owner'S Manual

Page: 45 / 64

45
Appendices
Effects List
You can assign transition effects to the MIX, WIPE, and EFX buttons. You can also allocate filter effects and compositing effects to
the A-A-Busnd B-Bus Effect buttons.
fig.effect-assign.eps
Transition Effects
Filter/Composition
Effects
Filter/Composition
Effects
If an effect has an “*” (asterisk) after its name, you can change its setting value in a smooth, continuous manner by turning the Effect Control dial.
Pressing a button to which such an effect is assigned makes the button flash. If no effect indicated by an “*” is assigned to the button, the button
lights up steadily when pressed. In such cases, operation of the Effect Control dial has no effect.
Transition Effects
Mix
fig.MIX.eps
001 : Mix01 The A and B video is switched gradually.
002 : Fam01 This is an abbreviation of “full additive mix.” The A and B luminance levels are maintained during the transition.
003 : Fam* You can move the A/B cross point during FAM transition.
004 : Nam01 This is an abbreviation of “non-additive mix.” Display during transition starts with areas of high luminance.
005 : Nam* You can move the A/B cross point during NAM transition.
You can set the cross point (0% to 100%) by going to the SETUP menu (p. 43) and setting [NAM/FAM CROSS POINT].