manualshive.com logo in svg

Roland V-1200HD RCS, Owner'S Manual

Share
Download
Roland V-1200HD RCS Owner'S Manual Download Page 9

9

USING THE UNIT SAFELY

                                                                      4

CONSIGNES DE SÉCURITÉ  

                  6

IMPORTANT NOTES

                                                                                8

Placement and Setup

                                                                            10

Important Notes on Installation

                                                        10

Important Notes on Rack Mounting

                                                  10

Connecting the Power Cord

                                                               10

Using the Power Cord Hook

                                                                12

Using an External Power Source

                                                        12

Turning the Power On and Off

                                                           12

Installing an Expansion Interface (Option)

                                      14

Attaching the Rubber Feet

                                                                  14

Installation et Configuration  

            11

Remarques importantes concernant l’installation

                          11

Remarques importantes sur le montage en rack

                            11

Connexion du cordon d’alimentation

                                              11

Utilisation du Crochet du cordon d’alimentation

                          13

Utilisation d’une source d’alimentation externe

                            13

Mise sous tension et hors tension de l’appareil

                              13

Installation d’une Interface d’extension (Option)

                          15

Fixation des pieds en caoutchouc

                                                    15

Part Names and Functions

                                                                  16

Front Panel

                                                                                            16

Rear Panel

                                                                                              17

Internal Structure of the V-1200HD

                                                19

About Processing Formats

                                                                  19

About HDMI IN 3 and 4

                                                                        20

About Copyright Protection (HDCP)

                                                20

Connecting External Equipment

                                                      21

Connecting Source Equipment

                                                          23

Connecting Video Source Equipment

                                    23

Connecting Audio Source Equipment

                                   24

Connecting a Reference

                                                            24

Connecting Output Equipment

                                                        25

Connecting Video Output Equipment

                                  25

Connecting Audio Output Equipment

                                  25

Setup Menu

                                                                                              26

Using the Menus

                                                                                  26

Menu Organization

                                                                              26

Remote Control from an External Device

                                    27

Using a V-1200HDR Dedicated Controller

                                        27

Using V-1200HD RCS Dedicated Software

                                       27

RS-232 Connector Specifications

                                                      28

Using the TALLY/GPIO Connector

                                                      28

Other Features

                                                                                          29

Operating a VISCA-Compatible Video Camera  

by Remote Control

          29

About the TALLY/GPIO Connector

                                                    29

Saving/Recalling Settings

                                                                    30

Checking the Version Information

                                                    30

Formatting a USB Flash Drive

                                                            30

Returning Settings to the Factory-Default State  

(Factory Reset)

                  30

Appendix

                                                                                                    31

Troubleshooting

                                                                                  31

Main Specifications

                                                                              32

Dimensions

                                                                                            33

Block Diagram

                                                                                      34

Contents

Before using this unit, carefully read the sections entitled “IMPORTANT SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 4), and 

“IMPORTANT NOTES” (p. 8). These sections provide important information concerning the proper operation of the unit. Additionally, in order 
to feel assured that you have gained a good grasp of every feature of your new unit, read this Owner’s Manual in its entirety. This manual 

should be saved and kept on hand as a convenient reference.

201b

Checking the Included Items

The following items are included with this unit. Check to make sure that all items are present. If anything is missing, contact your dealer.

…

…

The unit

…

…

Power cord

…

…

Rubber feet (4)

…

…

Owner’s Manual

*  The shape of the power cord’s 

plug varies depending on the 

country.

Summary of Contents for V-1200HD RCS









































Reviews:

No comments

Brands by name

Popular brands

Load more brands