7
Configuring the Settings (UVC-02 Setup Tool)
About Your New UVC-02 Setup Tool
Use the “UVC-02 Setup Tool” application running on a computer
connected via USB to configure the settings of the UVC-02. This
application lets you change the button functions, make various
settings and back up or restore the settings.
You can download the “UVC-02 Setup Tool” from the UVC-02 product
page.
https://roland cm/uvc-02/
5
Once you connect your computer on which the application is
installed to the UVC-02 by using the included USB cable,
UVC-02 Setup Tool starts up automatically.
5
You may see an onscreen message like the one shown below if
the system program of the UVC-02 is old. If this happens, click the
[UPDATE] button to update the system program of the UVC-02.
5
You can also press the [SETUP] button on the UVC-02 to close or
open the screen.
Setup Tool Screen
Name
Explanation
1
Page switcher tabs
Click on and select these tabs with your
mouse to switch between pages.
2
Settings screen
Shows the settings for each page.
3
Input/output level
meters
The level meters for each input/output.
4
Input/output sliders
Drag these sliders with your mouse to
adjust the levels for SFX1, SFX2, USB IN
and USB OUT.
5
HDMI IN
Shows the input video format.
6
USB VIDEO
“Active” is shown if the UVC-02 is being
used as a camera device by an application
on your computer.
* In the case of a format that is not supported
by this unit, it will be displayed in red. Check
the format.
Switching the Functions of the [A1] [A2]
Buttons
Click the [
BUTTON] tab to switch the page.
Menu
Value (bold text:
default value)
Explanation
A1
MODE
This selects the function assigned to the [A1] button.
VOICE CHANGE
You can select different types of
voice change for the MIC and for
the H.MIC.
SFX1
The button makes a sound effect
when pressed.
SLIDESHOW PREV.
Goes back one slide on your
computer.
A2
MODE
This specifies the function assigned to the [A2] button.
REVERB
Lets you adjust the reverb size
and level.
SFX2
The button makes a sound effect
when pressed.
SLIDESHOW NEXT
Goes forward one slide on your
computer.
MEMO
You can freely assign WAV files on your computer for the SFX1 and
SFX2 sounds.
1
Click the [CHANGE] button for A1 and A2 respectively.
2
Click the [FILE OPEN] button.
The file selection dialog box opens.
3
Select the WAV file you want to assign.
This sets the name of the WAV file you selected.
Click the [PREVIEW] button to preview the WAV file you set.
Click the [PRESET 1] and [PRESET 2] buttons to set the default sound
effects.
4
Click the [CHANGE SOUND] button.
The WAV files you selected are uploaded to the UVC-02.
5
Press the [A1]/ [A2] buttons on the UVC-02 to check
whether the sounds are playing.
Assignable WAV file formats
5
Sample rate: 44.1 kHz/48 kHz
5
Bit depth: 16 bits
5
Maximum Time: 5 sec.
