Roland U-20, Reference Card

Page: 8 / 13

Use Buttons To Select Rx CH.
(Receive Channel)
CURSOR


To Create A Split Keyboard You Will Need To Assign Two
Or More Parts To Receive On The Same MIDI Channel With
Different Key Ranges. For Example, In A Bass/Piano Split
Sound You Might Assign A Bass Sound To Part 1 & Set Its
Key Range From C-1 To B-3 (Left Side Of The Keyboard)
Then, You Can Assign A Piano Sound To Part 2 & Set Its
Key Range From C-3 To G-9 (Right Side Of The Keyboard)
Creating A Split Keyboard
Adjusting The Level Of The Rhythm Part In A Patch
To Set The Key Range
Once The Key Ranges Are Set, Each Of The Parts Used In
The Above Procedure Should Be Set To Receive On The
Same MIDI Channel. Use The Following Procedure To Set
The Appropriate MIDI Channels
EDIT
To Sound And Press
To Part And Press
To MIDI And Press
EDIT
To Sound And Press
To R.PRT And Press
To Level Then Use The Buttons To
Adjust The Level Of The Rhythm Part
Note: For More Even More Volume, Use
To Boost Then Use
To Key Range. And Press
Use Buttons To Select The Desired Part
Use Buttons To Select Desired MIDI Channel
PART


Use Buttons To Select The Desired Part
PART


Repeat To Set The Key Range For Any Additional Parts
Repeat To Set The Receive Channel For Additional Parts