Roland U-20, Reference Card

Page: 10 / 13

To Setup And Press
To MIDI And Press
To Sound And Press
To Control
EDIT
Press Simultaneously
While Holding
Press Simultaneously To Enter ROM Play
+
+
+
SOUND
+ SOUND
Checking The Firmware ROM Version
PART
RHYTHM
+
, Press
While Holding
, Press To Leave Screen
EXIT
Press Simultaneously
Setting Local ON/OFF
Changing Patches By Sending MIDI Program Changes
To Choose Desired MIDI Control Channel
EDIT
To Setup And Press
To MIDI And Press
To COMMON And Press
Use Buttons To Select Local Control
To Select The Desired Value (ON Or OFF)
CURSOR


You Can Change The Entire Setup (Patch) Of The U-20 By
Sending A Program change On The Control Channel. This
Will Change All Timbres And The Rhythm Set As Well As
The Effects Settings. (Program Changes On The MIDI
Channels Used For The Individuals Parts Will Change
Only The Timbres For The Selected Part)
It Is A Good Idea To Set The Control Channel To A MIDI
Channel That Is Not Being Used By The Individual Parts
In The Performance. Send A Program Change On The
Selected Control Channel From Your Sequencer