40672745 2PD
*
4
0
6
7
2
7
4
5
-
0
2
*
TDM-20/TDM-10 Owner’s Manual
Thank you, and congratulations on your choice of the Roland V-Drums Setting Mat TDM-20/TDM-10.
Setting Up
• Place the mat as shown in the figure, with the Roland logo behind and to the right of the drum set.
• If kick pedal slippage is a concern, attach the hook side of Velcro or other hook-and-loop fastener tape
(commercially available) to the underside of the kick pedal. This should help secure the kick pedal.
* Ensure that the spike of the kick trigger pad does not extend more than 5 mm from the rubber foot. Use with the spikes
extending more than 5 mm allows the spikes to penetrate the mat and damage flooring.
Specifications
Dimensions
TDM-20: 1600 (W) x 1500 (D) x 8 (H) mm
63 (W) x 59-1/16 (D) x 3/8 (H) inches
TDM-10: 1200 (W) x 1300 (D) x 8 (H) mm
47-1/4 (W) x 51-3/16 (D) x 3/8 (H) inches
Weight
TDM-20: 3.0 kg / 6 lbs 10 oz
TDM-10: 2.1 kg / 4 lbs 11 oz
Materials
Pile: Nylon
Filament
Backing: Soft Urethane Resin + Felt
Tag: Polyurethane
* This product has been treated to resist fire, soiling, and
static electricity.
* In the interest of product improvement, the specifications
and/or appearance of this mat are subject to change
without prior notice.
202
Copyright © 2005 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
Before using this mat, carefully read the sections entitled: “USING THE MAT SAFELY” and “IMPORTANT
NOTES” (this page). These sections provide important information concerning the proper operation of
the mat. Additionally, in order to feel assured that you have gained a good grasp of every feature
provided by your new mat, Owner’s manual should be read in its entirety. The manual should be saved
and kept on hand as a convenient reference.
Drum
Throne
Roland Logo
TDM-20
TD-20/TD-12 Drum Kit
1600 mm
1500 mm
1300 mm
Roland Logo
1200 mm
Drum
Throne
TDM-10
TD-6/TD-3 Drum Kit
USING THE UNIT SAFELY
001
• Before using this mat, make sure to read the
instructions below, and the Owner’s
Manual.
..................................................................................................
004
• Never use or store the mat in places that are:
• Subject to temperature extremes (e.g.,
direct sunlight in an enclosed vehicle,
near a heating duct, on top of heat-gener-
ating equipment); or are
• Damp (e.g., baths, washrooms, on wet
floors); or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
..................................................................................................
005 (modified)
• This mat is designed to be used exclusively
with Roland V-Drums. Do not use this mat
for other purposes or applications.
..................................................................................................
007
• Make sure you always have the mat placed
so it is level and sure to remain stable.
Never place it on stands that could wobble,
or on inclined surfaces.
..................................................................................................
013
• In households with small children, an adult
should provide supervision until the child
is capable of following all the rules essential
for the safe operation of the mat.
..................................................................................................
Add
• Although this mat has been treated to resist
fire, do not burn the mat intentionally.
Doing so may cause fire to break out.
..................................................................................................
IMPORTANT NOTES
291a
In addition to the items listed under “USING THE
MAT SAFELY” on this page, please read and
observe the following:
Placement
Add
• Use this mat indoors only.
354a
• Do not expose the mat to direct sunlight, place it
near devices that radiate heat, leave it inside an
enclosed vehicle, or otherwise subject it to temper-
ature extremes. Excessive heat can deform or
discolor the mat.
360 (modified)
• Depending on the material and temperature of the
surface on which you place the mat, the sponge
portion of the mat’s underside may adhere to
flooring surfaces or cause discoloration or degra-
dation of flooring surface materials.
Maintenance
401a (modified)
• For routine cleaning, use a vacuum cleaner to
remove any dust that may have accumulated on the
surface. In case of more serious soiling, use a
commercial carpet cleaner to spot-clean, and wipe to
remove stains. Do not launder or wash the entire
mat.
402
• Never use benzine, thinners, alcohol or solvents of
any kind, to avoid the possibility of discoloration
and/or deformation.
Additional Precautions
Add
• This product is not designed to provide total
insulation from sound or vibration.
Add
• This mat may move and slip around over the floor
when nothing has yet been placed on top of it. For
this reason, you need to be especially careful during
setup, when you carry in the equipment you intend
to place on the mat.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the mat be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the mat be used
improperly.
The
●
symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
