background image

2

USING THE UNIT SAFELY

001

• Before using this unit, make sure to read the 

instructions below, and the Owner’s Manual.

................................................................................................

002d

• Do not open or perform any internal modifi-

cations on the unit or its AC adaptor. (The 
only exception would be where this manual 
provides specific instructions which should 
be followed in order to put in place user-
installable options; see p. 7, p. 8.)

................................................................................................

003

• Do not attempt to repair the unit, or replace 

parts within it (except when this manual 
provides specific instructions directing you 
to do so). Refer all servicing to your retailer, 
the nearest Roland Service Center, or an 
authorized Roland distributor, as listed on 
the “Information” page.

................................................................................................

004

• Never use or store the unit in places that are:

• Subject to temperature extremes (e.g., 

direct sunlight in an enclosed vehicle, near 
a heating duct, on top of heat-generating 
equipment); or are

• Damp (e.g., baths, washrooms, on wet 

floors); or are

• Humid; or are

• Exposed to rain; or are

• Dusty; or are

• Subject to high levels of vibration.

................................................................................................

005

• This unit should be used only with a rack or 

stand that is recommended by Roland.

................................................................................................

006

• When using the unit with a rack or stand 

recommended by Roland, the rack or stand 
must be carefully placed so it is level and 
sure to remain stable. If not using a rack or 
stand, you still need to make sure that any 
location you choose for placing the unit 
provides a level surface that will properly 
support the unit, and keep it from wobbling.

................................................................................................

011

• Do not allow any objects (e.g., flammable 

material, coins, pins); or liquids of any kind 
(water, soft drinks, etc.) to penetrate the unit.

................................................................................................

013

• In households with small children, an adult 

should provide supervision until the child is 
capable of following all the rules essential for 
the safe operation of the unit.

................................................................................................

• To prevent accidents, never allow small 

children to play near the drum kit.

................................................................................................

Used for instructions intended to alert 
the user to the risk of injury or material 
damage should the unit be used 
improperly. 

* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic 
animals or pets. 

Used for instructions intended to alert 
the user to the risk of death or severe 
injury should the unit be used 
improperly. 

The 

 symbol alerts the user to things that must be 

carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In 
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet. 

The      symbol alerts the user to important instructions 
or warnings.The specific meaning of the symbol is 
determined by the design contained within the 
triangle. In the case of the symbol at left, it is used for 
general cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never 
be carried out (are forbidden). The specific thing that 
must not be done is indicated by the design contained 
within the circle. In the case of the symbol at left, it 
means that the unit must never be disassembled. 

Summary of Contents for TD-8KV

















Reviews: