background image

1

To Ensure Safe Use

Used for instructions intended to alert the user to the risk of death or severe
injury should the unit be used improperly.

About 

 and 

 Notices

Used for instructions intended to alert the user to the risk of injury or material
damage should the unit be used improperly.

* Material damage refers to damage or other adverse effects caused with

respect to the home and all its furnishings, as well to domestic animals or
pets.

About the Symbols

The 

 symbol alerts the user to important instructions or warnings.  The specific meaning of

the symbol is determined by the design contained within the triangle.  The symbol at left means
"danger of electrocution."

The 

 symbol alerts the user to items that must never be carried out (are forbidden).  The

specific thing that must not be done is indicated by the design contained within the circle.  The
symbol at left means the unit must never be disassembled.

The 

 symbol alerts the user to things that must be carried out.  The specific thing that must

be done is indicated by the design contained within the circle.  The symbol at left means the
power-cord plug must be unplugged from the outlet.

Do not disassemble, repair, or
modify.

Doing so may lead to fire or abnormal
operation resulting in injury.

Do not use with any power supply
other than the dedicated AC adapter.

Use with any other power supply may lead
to fire or electrocution.

Use only with a power supply of the
same rating as indicated on the AC
adapter.

Use with any other power supply may lead
to fire or electrocution.

Do not use while in an abnormal
state (i.e., emitting smoke, burning
odor, unusual noise, or the like).

Doing so may result in fire or electrical
shock.
Immediately unplug the AC adapter from
the electrical outlet, and contact your local
vendor or Roland sales center.

When unplugging the AC adapter
from the power outlet, grasp the
adapter unit or the plug, not the
cord.

Unplugging by pulling the cord may damage
it, leading to fire or electrocution.

Do not injure or modify the electrical
power cord, nor subject it to
excessive bends, twists, pulls,
binding, or pinching, nor place any
object of weight on it.

Doing so may
damage the
electrical power
cord, leading to
electrocution or
fire.

Summary of Contents for Stika Plus STX-8






































Reviews: