Roland SolJet Pro II SJ-1000, Setup Manual, Page: 31 / 39

4. Attaching the Included Items and Connecting the Cables
29
Important Notes on the Power Cord
This machine carries a high current of a maximum of approximately 10 amperes. Failure to observe the following
requirements in particular may lead to an accident that could not occur with low-power equipment.
WARNING
Never damage the power cord or pull it with force.
Doing so may tear the cord's insulation, causing an electrical short and resulting in electrical
shock, electrocution, or fire.
WARNING
Never place any object on the power cord, bend the power cord using excessive
force, or allow the power cord to become deformed.
The cord carries a high current of approximately 10 amperes. If it becomes deformed, the
deformed location may grow hot and cause fire.
WARNING
Never use the machine with the power cord bound into a bundle or roll.
The cord carries a high current of approximately 10 amperes. If the cord is in a bundle or roll,
it may grow hot and cause fire.
WARNING
Never use any power cord other than the power cord included with the machine.
Also, never use a power strip or extension cord.
The cord carries a high current of approximately 10 amperes. The power strip or extension
cord may grow hot and cause fire.
WARNING
Do not use with a damaged power cord or plug, or with a loose electrical outlet.
Doing so may lead to fire, electrical shock, or electrocution.