4. Assembly and Ink Filling
28
w
When the screen on the left is displayed, select the desired
language, and then press
.
x
Press
or
to select the desired length
unit, and then press
.
Select the desired temperature unit in the same way, and
then press
.
Step 9: Ink Filling
1.
Select the ink type.
Press
or
to select the ink type.
Ink type
Colors used
EJ 4 COLOR
cyan, magenta, yellow, and black
EJ 7 COLOR
cyan, magenta, yellow, black, light cyan, light magenta, and
light black.
Press
w
Confirm the ink type, and then press
to select
[YES].Press
If the ink type is incorrect, select [NO], and then press
to
start again from step
.
x
Make sure the drain bottle is installed, and then press
.
When the screen on the left is displayed, remove the
right cover.
Press the part in the following figure until it clicks. Lightly pull the
cover in the direction indicated with , and then remove the cover
by raising it in the direction indicated by .
/'07.#0)7#)'
'0).+5*
.'0)6*70+6
OO+0%*
6'/270+6
%(
ޕ
ޕ
5'.'%6+0-6;2'
',%1.14
',%1.14
=;'5?01
+056#..
&4#+0$166.'
12'0%18'44
Clic
k!
