4. Assembly and Ink Filling
17
z
Attach the media holder adjuster to the right arm as seen from the rear of the machine.
Pass the protrusions of the media holder adjuster (
) through the notches on the arm
(
).
and then
temporarily tighten the bolts so that the media holder adjuster does not fall off.
Attach the adjustment bolt (
).
|
Tighten the bolt until the bottom of the arm and the bottom of the media holder adjuster
are aligned (
).
Arm
Media holder
adjuster
Adjustment bolt
Align the bottom of the
media holder adjuster
and the bottom of the
arm.
