13
Making the Connections
Refer to the figure shown below to connect the SA-300 and the other equipment.
fig.02-01
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
* Before making any connections, set the SA-300’s MASTER
VOLUME knob to “0.”
* Use only the specified expression pedal (EV-5, etc.; optional).
By connecting any other expression pedals, you risk causing
malfunction and/or damage to the unit.
* When connection cables with resistors are used, the volume
level of equipment connected to the inputs may be low. If this
happens, use connection cables that do not contain resistors,
such as those from the Roland PCS series.
Expression Pedal
(Roland EV-5, etc.)
Foot Switches
White
Red
Mixer
CD Player
Rhythm Machine
Mic
FS-5L
FS-5U
FS-6
FS-5U
FS-5U
PCS-31
Connection
Cable
SA-300W
INPUT
Keyboard
Electric Guitar
+
Effector
Guitar equipped
with a
preamped pickup
Stereo 1/4”
phone plugs
at both ends
Summary of Contents for SA-300
Page 24: ...SD000706 1 DH ...
