background image

 

IMPORTANT SAFETY INSTRUCTIONS ............................ 2

USING THE UNIT SAFELY ................................................ 3

IMPORTANT NOTES.......................................................... 6

Main Features .................................................................... 7

Names of Things and What They Do ............................... 8

 

Control Panel............................................................................................. 8
Jack Panel ................................................................................................. 10

 

Making the Connections ................................................. 13

 

Switching the Power On and Off ......................................................... 14
About Setting the Volume ..................................................................... 14
About Stereo Link................................................................................... 15

 

About the Anti-Feedback Function................................ 16

 

Features of SA-300 ANTI-FEEDBACK ................................................ 16
How to Use Anti-Feedback ................................................................... 17

 

About the Use of Stacks ................................................. 18

About the Protection Circuit........................................... 18

Using a Speaker Stand ................................................... 19

Block Diagram ................................................................. 20

Main Specifications ......................................................... 21

 

Owner’s Manual

 

Copyright © 2005 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the 
written permission of ROLAND CORPORATION.

 

Thank you, and congratulations on your choice of the Roland

 

 SA-300 

 

Stage Amplifier.

Additionally, in order to feel assured that you have gained a good grasp of every 
feature provided by your new unit, Owner’s manual should be read in its entirety. 
The manual should be saved and kept on hand as a convenient reference.

 

Contents

Before using this unit, carefully read the sections entitled

• IMPORTANT SAFETY INSTRUCTIONS (page 2)

• USING THE UNIT SAFELY (page 3–5)

• IMPORTANT NOTES (page 6)

Summary of Contents for SA-300

























Reviews: