background image

 

4

 

013

 

In households with small children, an adult should 
provide supervision until the child is capable of 
following all the rules essential for the safe 
operation of the unit.

 

..........................................................................................................

 

014

 

Protect the unit from strong impact.
(Do not drop it!)

 

..........................................................................................................

 

015

 

Do not force the unit’s power-supply cord to share 
an outlet with an unreasonable number of other 
devices. Be especially careful when using 
extension cords—the total power used by all 
devices you have connected to the extension 
cord’s outlet must never exceed the power rating 
(watts/amperes) for the extension cord. Excessive 
loads can cause the insulation on the cord to heat 
up and eventually melt through.

 

..........................................................................................................

 

016

 

Before using the unit in a foreign country, consult 
with your retailer, the nearest Roland Service 
Center, or an authorized Roland distributor, as 
listed on the “Information” page.

 

..........................................................................................................

 

026

 

Do not put anything that contains water (e.g., 
flower vases) on this unit. Also, avoid the use of 
insecticides, perfumes, alcohol, nail polish, spray 
cans, etc., near the unit. Swiftly wipe away any 
liquid that spills on the unit using a dry, soft cloth.

 

..........................................................................................................

 

101a

 

The unit should be located so that its location or 
position does not interfere with its proper venti-
lation.

 

..........................................................................................................

 

102b

 

Always grasp only the plug on the power-supply 
cord when plugging into, or unplugging from, an 
outlet or this unit.

 

..........................................................................................................

 

103a

 

At regular intervals, you should unplug the power 
plug and clean it by using a dry cloth to wipe all 
dust and other accumulations away from its 
prongs. Also, disconnect the power plug from the 
power outlet whenever the unit is to remain 
unused for an extended period of time. Any 
accumulation of dust between the power plug and 
the power outlet can result in poor insulation and 
lead to fire.

 

..........................................................................................................

 

104

 

Prevent cords and cables from becoming 
entangled and ensure that all cards and cables 
are placed so that they are out of reach of 
children.

 

..........................................................................................................

 

106

 

Never climb on top of, nor place heavy objects on 
the unit.

 

..........................................................................................................

 

107b

 

Never handle the power cord or its plugs with wet 
hands when plugging into, or unplugging from, an 
outlet or this unit.

 

..........................................................................................................

 

108a

 

Before moving the unit, disconnect the power plug 
from the outlet, and pull out all cords from external 
devices.

 

..........................................................................................................

 

109a

 

Before cleaning the unit, turn off the power and 
unplug the power cord from the outlet (p. 10).

 

..........................................................................................................

 

110a

 

Whenever you suspect the possibility of lightning 
in your area, pull the plug on the power cord out of 
the outlet.

 

..........................................................................................................

 

Add

 

When you mount the S-240P onto a rack, please 
be careful so that you won’t pinch your fingers.

 

..........................................................................................................

S-240P_e.book 4 ページ 2007年5月23日 水曜日 午後2時52分

Summary of Contents for RSS S-240P













Reviews: