Roland ROL-V-1HD, Manual

Page: 19 / 22

MIDI Implementation
19
3.3 V-LINK
Start Description
10H 00H 00H System Preference Area (See 3-3-1)
10H 10H 00H Clip Control Assignment Area (See 3-3-2)
10H 20H 00H Color Control Assignment Area (See 3-3-3)
10H 30H 00H Clip Control Preference Area (See 3-3-4)
* V-LINK messages are ignored if received while V-LINK is turned OFF.
* If V-LINK ON is received after reception of MVC ON, the unit changes from MVC mode to V-LINK mode.
* The settings executed using V-LINK messages are not saved to internal memory.
* Default V-LINK settings as follows.
Parameter Assign Value (status)
Clip Control Ch. - 1
Color Control Ch. - 1
Note Control - OFF
Transition Time CC#05 0
Transition Type Sel. OFF -
Audio Level OFF -
Output Fade OFF -
Keyboard Range Lower - 36
Keyboard Range Upper - 84
* Send data divided into 2 parts for the address with “#”, upper nibble (upper 4 bits) and lower nibble (lower 4 bits).
Example)
If the data you are transmitting is BCH, send 0BH as the first byte, then send 0CH. When receiving, if the unit does not receive consecutive 2 byte, such data transmission is
ignored.
„ z
3-3-1. System Preference Area
Address Parameter Name Sys.Ex.Value Meaning of Value
10H 00H 00H V-LINK Enabled 00H–01H OFF, ON
10H 00H 01H V-LINK Rx MIDI Channel (Clip) 00H–10H 1–16 Ch., OFF
10H 00H 02H V-LINK Rx MIDI Channel (Color) 00H–10H 1–16 Ch., OFF
10H 00H 03H V-LINK Note Mode 00H, 02H OFF, Assignable
„ z
3-3-2. Clip Control Assignment Area
Address Parameter Name Sys.Ex.Value Meaning of Value
#10H 10H 02H V-LINK Rx Setting (Dissolve Time) 01H-05H, 07H-1FH, 40H-5FH, D0H, E0H, FFH
Transition Time: Control Change,
Channel Press, Pitch Bend, OFF
#10H 10H 04H V-LINK Rx Setting (Audio Level) 01H-05H, 07H-1FH, 40H-5FH, D0H, E0H, FFH
Audio Level: Control Change,
Channel Press, Pitch Bend, OFF
#10H 10H 10H V-LINK Rx Setting (Transition Type) 01H-05H, 07H-1FH, 40H-5FH, D0H, E0H, FFH
Transition Type: Control Change,
Channel Press, Pitch Bend, OFF
„ z
3-3-3. Color Control Assignment Area
Address Parameter Name Sys.Ex.Value Meaning of Value
#10H 20H 20H V-LINK Rx Setting (Output Fader) 01H-05H, 07H-1FH, 40H-5FH, D0H, E0H, FFH
Output Fader: Control Change,
Channel Press, Pitch Bend, OFF
„ z
3-3-4. Clip Control Preference Area
Address Parameter Name Sys.Ex.Value Meaning of Value
10H 30H 02H
V-LINK Rx Setting
(Assignable Note Mode: Lower Key)
00H–7FH Note Number
10H 30H 03H
V-LINK Rx Setting
(Assignable Note Mode: Upper Key)
00H–7FH Note Number