8
C
Set the maximum
cutting depth
Make the setting for the maximum
cutting depth.
Drag the spin dial up or down, or
enter a numerical value.
Clicking [Center] sets the depth at
a location proportional to the
height.
A
Select the direction
of the object
Select the direction to be used for
cutting the object.
In the figure, cutting from above is
selected.
B
Set the dimension
Make the setting for object's size.
Drag the spin dial up or down, or
enter a numerical value.
You can also specify a scale for the
size.
D
Tool diameter
Set the type and diameter of the
tool that is installed.
Material
Choose the composition of the
loaded material.
Finish
When cutting a solid object on a modeling machine, an attractive finish can be obtained by first performing rough (draft) cutting,
then performing fine cutting. Set to [Draft] for the first pass, and to [Fine] for the second pass.
Open the [File] menu and choose [Save As].
5
Choose the location for saving the file, enter a name for the file, then click [SAVE].
6
Open the [File] menu and choose [START] to start cutting.
7
