Roland Music ATELIER AT75, Owner'S Manual

Page: 113 / 144

111
Various Other Settings
Various Other Settings
* When the pedal part button is ON, data received at the MIDI In
connector will control the pedal part of keyboard sound
generator.
When the pedal part button is OFF, data received at the MIDI In
connector will control the GS sound generator.
There are limitations on the types of MIDI messages that can
be received by the keyboard sound generator.
This setting remains stored in memory even while power is
turned off.
To return to the basic screen, press the [Utility] button.
When you use the MIDI connectors of the ATELIER to transmit
musical data to external devices, for each keyboard (Upper,
Lower, and Pedal) you can specify the channel on which your
playing will be transmitted as MIDI messages. You can modify
these Tx (Transmit) MIDI settings as needed.
For details refer to “Connecting MIDI Devices” (p. 118).
1.
Press the [Utility] button.
2.
Press the Menu [ ] [ ] buttons a number
of times to select “MIDI.”
3.
Press the [Rec] button.
4.
Press the Menu [ ] [ ] buttons a number
of times to select “TxMIDI Channel.”
5.
Press the Menu [ ] [ ] buttons to select a
part.
6.
Press the Value [-] [+] buttons to select the MIDI
transmission channel.
To return to the basic screen, press the [Utility] button.
The Control part transmits expression pedal data and PC
numbers.
Ch MODE 1 MODE 2
1 GS Solo
2 GS Pedal/GS *
3 GS Lower
4 GS Upper
5–10 GS GS
11 GS Drums/SFX
12 GS GS
13 GS Nothing
14–15 GS GS
16 GS Control
Selecting the MIDI Transmit Channel
(TxMIDI Channel)
Part
Upper, Lower, Pedal, Control
Channel
1–16
AT-75_e.book 111 ページ ２００８年８月２１日 木曜日 午前１０時９分