manualshive.com logo in svg

Roland MODELA MDX-50, Setup Manual

Share
Download
Roland MODELA MDX-50 Setup Manual Download Page 32

Preparing the Machine for Use

30

Installation Procedure

You can install the driver, software, and electronic-format manual all at once. You can also install the driver 
and each piece of software separately.

 

"

User's manual (electronic-format manual) "Installing the Driver Separately"

Important

•  Be sure to connect the machine to the computer as instructed in the procedure. 

Failure to follow the correct procedure may make installation impossible.

•  If an old version of SRP Player is installed, uninstall it, and then install a new version.

Procedure

A 

Before installation, confirm that the machine and the computer are 

not connected with 

the USB cable.

B 

Log on to Windows as the computer's administrator (or as an "Administrators" account).

C 

Insert the Roland DG Software Package CD into the CD-ROM drive of the computer.

When the automatic playback window appears, click [Run menu.exe]. If a "User Account Control" 
window appears, click [Allow] or [Yes], and then continue with the installation. The setup menu 
screen appears automatically.

D 

Click [Install].

Install the MDX-50 driver and the various software programs all at once. Follow the on-screen in-
structions to proceed with the installation.

 

"

P. 29 "Step 2 : Installing the Roland DG Software Package"

If the following screen appears during installation

Windows 10

Click [Install].

Summary of Contents for MODELA MDX-50



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands