Using the Sequencer
24
You can select the group (A/B) by holding down the [START] button and repeatedly pressing the BANK [1]–[8] buttons.
2.
Hold down the [START] button and press the NUMBER [1]–[8] buttons.
This selects the pattern.
●
You can also turn the [VALUE] knob while holding down the [SHIFT] button to select the bank and pattern.
●
When you press the [EXIT] button while holding down the [START] button, the [START] button remains in a pressed-down
state. In this case, you can still select banks and patterns even if you take your finger off the [START] button. To cancel the
selection, press the [EXIT] button.