Roland HU-500, User Manual

Page: 5 / 26

3
Do not use with a damaged power
cord or plug, or with a loose electri-
cal outlet.
Doing so may lead to
fire, electrical shock,
or electrocution.
Do not damage or modify the electri-
cal power cord, subject it to exces-
sive bending, twisting, pulling, bind-
ing, or pinching, or place any object
or weight on it.
Doing so may dam-
age the electrical
power cord, leading
to fire, electrical
shock, or electrocu-
tion.
When not in use for extended periods,
unplug the power-cord plug from the
electrical outlet.
Failure to do so may re-
sult in danger of electri-
cal shock, electrocution,
or fire due to deterioration
of electrical insulation.
When unplugging the electrical power
cord from the power outlet, grasp the
plug, not the cord.
Unplugging by pulling
the cord may dam-
age it, leading to fire,
electrical shock, or
electrocution.
Do not allow liquids, metal objects or
flammables inside the machine.
Such materials
can cause fire.
Do not hang on to the hose. Do not
hang anything on it.
Doing so may cause the unit to tip over, lead-
ing to injury.
Be sure to use the media with a width
of 500 mm (19-11/16 in.) or more.
Failure to do so may cause overheating of
the heater, leading to fire.
Do not press the [SEL] key of the con-
troller.
Doing so may cause malfunction of the
heater, leading to fire.
Do not attempt to unplug the power-
cord plug with wet hands.
Doing so may result
in electrical shock
or electrocution.
Ensure adequate ventilation for the
work area.
Failure to do so may result in odor, physical
distress, or fire.
Do not touch the platen when the
heater is operating.
Doing so may cause burns because the
platen is hot.
When cleaning the heater unit, be sure
to wait approximately 30 minutes or
more after switching off the power of
the heater until the temperature of the
platen falls sufficiently.
Doing so may cause burns because the
platen is hot.