background image

 WARNING

To completely turn off power to the unit, pull 

out the plug from the outlet

Even with the power switch turned 

off, this unit is not completely 

separated from its main source 

of power. When the power needs 

to be completely turned off, turn off the 

power switch on the unit, then pull out the 

plug from the outlet. For this reason, the 

outlet into which you choose to connect 

the power cord’s plug should be one that is 

within easy reach and readily accessible.

Do not disassemble or modify by yourself

Do not carry out anything unless 

you are instructed to do so in the 

owner’s manual. Otherwise, you 

risk causing malfunction.

Do not repair or replace parts by yourself

Refer all servicing to your retailer, 

the nearest Roland Service 

Center, or an authorized Roland 

distributor, as listed on the 

“Information.”

Do not use or store in the following types of 

locations

•  Subject to temperature 

extremes (e.g., direct sunlight 

in an enclosed vehicle, near a 

heating duct, on top of heat-

generating equipment); or are

•  Damp (e.g., baths, washrooms, 

on wet floors); or are

•  Exposed to steam or smoke; or are
•  Subject to salt exposure; or are
•  Exposed to rain; or are
•  Dusty or sandy; or are
•  Subject to high levels of vibration and 

shakiness.

Do not place in an unstable location

Otherwise, you risk injury as the 

result of the unit toppling over or 

dropping down.

Use only the supplied AC adaptor and the 

correct voltage

Be sure to use only the AC adaptor 

supplied with the unit. Also, 

make sure the line voltage at the 

installation matches the input voltage 

specified on the AC adaptor’s body. Other 

AC adaptors may use a different polarity, or 

be designed for a different voltage, so their 

use could result in damage, malfunction, 

or electric shock.

Do not bend the power cord or place heavy 

objects on it

Otherwise, fire or electric shock 

may result.

 WARNING

Do not allow foreign objects or liquids to 

enter unit; never place containers with liquid 

on unit

Do not place containers containing 

liquid (e.g., flower vases) on this 

product. Never allow foreign 

objects (e.g., flammable objects, 

coins, wires) or liquids (e.g., water 

or juice) to enter this product. 

Doing so may cause short circuits, 

faulty operation, or other malfunctions.

Turn off the unit if an abnormality or 

malfunction occurs

Immediately turn the unit off, 

remove the AC adaptor from the 

outlet, and request servicing by 

your retailer, the nearest Roland 

Service Center, or an authorized Roland 

distributor, as listed on the “Information” 

when:

•  The AC adaptor or the power cord has 

been damaged; or

•  If smoke or unusual odor occurs; or
•  Objects have fallen into, or liquid has 

been spilled onto the unit; or

•  The unit has been exposed to rain (or 

otherwise has become wet); or

•  The unit does not appear to operate 

normally or exhibits a marked change in 

performance.

Be cautious to protect children from injury

Always make sure that an adult is 

on hand to provide supervision 

and guidance when using the 

unit in places where children are 

present, or when a child will be using the 

unit.

Do not drop or subject to strong impact

Otherwise, you risk causing 

damage or malfunction.

Do not share an outlet with an unreasonable 

number of other devices

Otherwise, you risk overheating 

or fire.

Do not use overseas

Before using the unit in overseas, 

consult with your retailer, the 

nearest Roland Service Center, or 

an authorized Roland distributor, 

as listed on the “Information.”

 CAUTION

Place in a well ventilated location

The unit and the AC adaptor 

should be located so their location 

or position does not interfere with 

their proper ventilation.

 CAUTION

When disconnecting the power cord, grasp it 

by the plug

To prevent conductor damage, 

always grasp the power cord by its 

plug when disconnecting it from 

this unit or from a power outlet.

Periodically clean the power plug

An accumulation of dust or foreign 

objects between the power plug 

and the power outlet can lead to 

fire or electric shock.
At regular intervals, be sure to pull out the 

power plug, and using a dry cloth, wipe 

away any dust or foreign objects that may 

have accumulated.

Disconnect the power plug whenever the 

unit will not be used for an extended period 

of time

Fire may result in the unlikely event 

that a breakdown occurs.

Route all power cords and cables in such a 

way as to prevent them from getting 

entangled

Injury could result if someone were 

to trip on a cable and cause the 

unit to fall or topple.

Avoid climbing on top of the unit, or placing 

heavy objects on it

Otherwise, you risk injury as the 

result of the unit toppling over or 

dropping down.

Never connect/disconnect a power plug if 

your hands are wet

Otherwise, you could receive an 

electric shock.

Disconnect all cords/cables before moving 

the unit

Before moving the unit, disconnect 

the power plug from the outlet, 

and pull out all cords from external 

devices.

Before cleaning the unit, disconnect the 

power plug from the outlet

If the power plug is not removed 

from the outlet, you risk receiving 

an electric shock.

Whenever there is a threat of lightning, 

disconnect the power plug from the outlet

If the power plug is not removed 

from the outlet, you risk receiving 

an electric shock.

Keep small items out of the reach of children

To prevent accidental ingestion of 

the parts listed below, always keep 

them out of the reach of small 

children.

•  Included Parts: Ferrite core

IMPORTANT NOTES

USING THE UNIT SAFELY

Power Supply

•  Do not connect this unit to same electrical 

outlet that is being used by an electrical 

appliance that is controlled by an inverter 

or a motor (such as a refrigerator, washing 

machine, microwave oven, or air conditioner). 

Depending on the way in which the electrical 

appliance is used, power supply noise 

may cause this unit to malfunction or may 

produce audible noise. If it is not practical 

to use a separate electrical outlet, connect a 

power supply noise filter between this unit 

and the electrical outlet.

•  The AC adaptor will begin to generate heat 

after long hours of consecutive use. This is 

normal, and is not a cause for concern.

•  This unit is equipped with a protection 

circuit. A brief interval (a few seconds) 

after turning the unit on is required 

before it will operate normally.

Placement

•  This unit may interfere with radio and 

television reception. Do not use this unit in 

the vicinity of such receivers.

•  Noise may be produced if wireless 

communications devices, such as cell 

phones, are operated in the vicinity of this 

unit. Such noise could occur when receiving 

or initiating a call, or while conversing. 

Should you experience such problems, you 

should relocate such wireless devices so 

they are at a greater distance from this unit, 

or switch them off.

•  When moved from one location to 

another where the temperature and/or 

humidity is very different, water droplets 

(condensation) may form inside the unit. 

Damage or malfunction may result if you 

attempt to use the unit in this condition. 

Therefore, before using the unit, you must 

allow it to stand for several hours, until the 

condensation has completely evaporated.

•  Do not place containers or anything else 

containing liquid on top of this unit. Also, 

whenever any liquid has been spilled on the 

surface of this unit, be sure to promptly wipe 

it away using a soft, dry cloth.

Additional Precautions

•  Use a reasonable amount of care when 

using its jacks and connectors. Rough 

handling can lead to malfunctions.

•  When disconnecting all cables, grasp the 

connector itself—never pull on the cable. 

This way you will avoid causing shorts, or 

damage to the cable’s internal elements.

•  When you need to transport the unit, 

pack it in shock-absorbent material. 

Transporting the unit without doing 

so can cause it to become scratched or 

damaged, and could lead to malfunction.

Copyrights/Licenses/Trademarks

•  MMP (Moore Microprocessor Portfolio) 

refers to a patent portfolio concerned 

with microprocessor architecture, which 

was developed by Technology Properties 

Limited (TPL). Roland has licensed this 

technology from the TPL Group.

•  Roland is an either registered trademark 

or trademark of Roland Corporation in the 

United States and/or other countries.

•  Company names and product names 

appearing in this document are registered 

trademarks or trademarks of their respective 

owners.

Used for instructions intended to alert the 
user to the risk of injury or material 
damage should the unit be used 
improperly. 
* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic animals 
or pets. 

Used for instructions intended to alert the 
user to the risk of death or severe injury 
should the unit be used improperly. 

The       symbol alerts the user to things that must be 
carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In the 
case of the symbol at left, it means that the power-cord 
plug must be unplugged from the outlet. 

The       symbol alerts the user to important instructions or 
warnings.The specific meaning of the symbol is 
determined by the design contained within the triangle. In 
the case of the symbol at left, it is used for general 
cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never be 
carried out (are forbidden). The specific thing that must 
not be done is indicated by the design contained within 
the circle. In the case of the symbol at left, it means that 
the unit must never be disassembled. 

About       WARNING and       CAUTION Notices

About the Symbols

ALWAYS OBSERVE THE FOLLOWING

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

–   Reorient or relocate the receiving antenna.

–   Increase the separation between the equipment and receiver.

–   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–   Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

 (1) this device may not cause harmful interference, and

 (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment requires shielded interface cables in order to meet FCC class B limit.

Any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the user’s 

authority to operate the equipment.

WARNING

This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For C.A. US (Proposition 65)

For Canada

CAN ICES-3 (B)/NMB-3 (B)

For Korea

Information

When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below.

AFRICA

ALGERIA / ANGOLA / CABO VERDE 

/ GUINEA / LIBYA /MOROCCO / 

MOZANBIQUE /TUNISIA

Roland Iberia, S.L.

Paseo García Faria, 33-35

08005 Barcelona, SPAIN

TEL: +34 93 493 9136

SOUTH AFRICA

Paul Bothner(PTY) Ltd.

Royal Cape Park, Unit 24 

Londonderry Road, Ottery 7800 

Cape Town, SOUTH AFRICA

TEL: +27 21 799-4900

ASIA

CHINA

Roland China Limited

Shanghai Mart, Room 1507, No. 2299 

Yanan Road West,

Changning District, Shanghai, 200336, 

CHINA

TEL: +86-021-6236-6800 

INDIA

Rivera Digitec (India)Pvt.Ltd

411, Nirman Kendra Mahalaxmi

Flats Compound off . Dr.Edwin

Moses Road, Mumbai-400011, INDIA

TEL: +91 22 2493 9051

INDONESIA

PT. Citra Intirama

Ruko Garden Shopping Arcade

Unit 8 CR, Podomoro City, JL.Let Jend.

S.Parman Kav.28, Jakarta Barat

11470, INDONESIA

TEL: +62 21 5698-5519

KOREA

KOREA AVICS CO., LTD.

Unit B-2208, Woolimblue9, 

#240-21, Yeomchang-dong, 

Gangseo-gu, Seoul, KOREA 

TEL: +82 2-322-3264

MALAYSIA / SINGAPORE

Roland Asia Pacifi c Sdn. Bhd.

45-1, Block C2, Jalan PJU 1/39, 

Dataran Prima, 47301 Petaling Jaya, 

Selangor, MALAYSIA

TEL: +603-7805-3263

PHILIPPINES

EVI DISTRIBUTION PHILIPPINES, INC.

117. Sevilla Street , Brgy. Pedreo Cruz, 

San Juan City 1210, PHILIPPINES

TEL: +632 774-5555

TAIWAN

ROLANDTAIWAN ENTERPRISE CO., LTD.

9F-5, No. 112 Chung Shan 

North Road Sec. 2 Taipei 104, TAIWAN 

R.O.C.

TEL: +886 2 2561 3339

VIET NAM

VIET THUONG CORPORATION

386 Cach Mang Thang Tam St.

Dist.3, Ho Chi Minh City, VIET NAM

TEL: +84-08-9316540

CENTRAL/SOUTH

AMERICA

BRAZIL

Roland Brasil Ltda.

Rua San Jose, 211 

Parque Industrial San Jose 

Cotia - Sao Paulo - SP, BRAZIL 

TEL: +55 11 4615-5666

Other CENTRAL/ 

SOUTH AMERICA

Roland Corporation U.S.

5100S. Eastern Ave. Los Angeles, 

California 90040, USA

TEL: +1 (323) 215-2111

EUROPE

AUSTRIA / GERMANY

Roland Germany GmbH

Adam-Opel-Strabe 4, 

64569, Nauheim, GERMANY

TEL: +49 (0)6152-955 46 00

BELGIUM / FRANCE / 

HOLLAND / LUXEMBOURG

Roland Center Europe NV

Houtstraat 3, 

B-2260, Westerlo(Oevel), BELGIUM

TEL: +32(0) 14 57 58 11

CROATIA

ART-CENTAR

Degenova 3. 

HR - 10000 Zagreb, CROATIA

TEL: +385 1 46 68 493

CZECH REP.

CZECH REPUBLIC DISTRIBUTOR s.r.o

Voctárova 247/16 

180 00 Praha 8, CZECH REP

TEL: +420 283 020 270

DENMARK

Roland Scandinavia A/S

Skagerrakvej 7 Postbox 880 

DK-2150 Nordhavn, DENMARK

TEL: +45 39 16 62 00

FINLAND

Roland Scandinavia As, Filial Finland

Vanha Nurmijarventie 62 

01670 Vantaa, FINLAND

TEL: +358 9-6824020

GREECE

Bon Studio

6 Zaimi Street Exarhia 

106 83 Athens, GREECE

TEL: +30 210 3809605

HUNGARY / ROMANIA

Roland East Europe Ltd.

2045. Torokbalint, FSD Park 3. ep. 

HUNGARY

TEL: +36 (23) 511-011

ITALY

Roland Italy SpA

Viale dell industrie, 8 

20020, Arese-Mi, ITALY

TEL: +39(0)2-937781

MALTA

Roland Iberia, S.L.

Paseo García Faria, 33-35

08005 Barcelona, SPAIN

TEL: +34 93 493 9136

NORWAY

Kontor NorgeRoland Scandinavia Avd.

Lilleakerveien 2 Postboks 95 

Lilleaker N-0216 Oslo, NORWAY

TEL: +47 22 73 00 74

POLAND

ROLAND POLSKA SP. Z O.O. 

ul. Kty Grodziskie 16B 

03-289 Warszawa, POLAND

TEL: +48 22 678-95-12

PORTUGAL / SPAIN

Roland Iberia, S.L.

Paseo García Faria, 33-35

08005 Barcelona, SPAIN

TEL: +34 93 493 9136

RUSSIA

Roland Music LLC

Dorozhnaya ul.3,korp.6 

117 545 Moscow, RUSSIA 

TEL: +7 (495) 981-4967

SERBIA

Music AP Ltd.

Sutjeska br. 5 XS - 24413 Palic, SERBIA

TEL: +381-24-539-395

SLOVAKIA

DAN Distribution s.r.o

Povazská 18. 

SK - 940 01 Nové Zámky, SLOVAKIA

TEL: +421 35 6424 330

SWEDEN

Roland Scandinavia A/S
SWEDISH SALES OFFICE

Mårbackagatan 31, 4 tr. 

SE-123 43 Farsta, Sweden

TEL: +46 8-683 04 30

SWITZERLAND / 

LIECHTENSTEIN

Roland (Switzerland) AG

Landstrasse 5, CH-4452 Itingen, 

SWITZERLAND

TEL: +41 61 975 99 99

UKRAINE

EURHYTHMICS Ltd.

P.O.Box: 37-a. 

Nedecey Str. 30 

UA - 89600 Mukachevo, UKRAINE

TEL: +380 3131 414-40

IRELAND/ 

UNITED KINGDOM

Roland (U.K.) Ltd.

Atlantic Close, Swansea Enterprise Park, 

Swansea 

SA7 9FJ, UNITED KINGDOM

TEL: +44 1792 702701

OCEANIA

AUSTRALIA / 

NEW ZEALAND 

Roland Corporation 
Australia Pty.,Ltd.

38 Campbell Avenue 

Dee Why West, NSW 2099, AUSTRALIA

For Australia

TEL: +61 2 9982 8266 

For New Zealand

TEL: +64 9 3098 715

MIDDLE EAST

BAHRAIN / KUWAIT / OMAN 

QATAR / U.A.E

NMK Electronics

P.O.Box 3191 Sharjah, UAE

TEL: +971-4-2665244

CYPRUS / JORDAN / IRAQ 

LEBANON / SYRIA /YEMEN

Roland Iberia, S.L.

Paseo García Faria, 33-35 

08005 Barcelona, SPAIN

TEL: +34 93 493 9136

IRAN

MOCO INC.

Jadeh Makhsous karaj (K-9), 

Nakhe Zarin AVE.

Jalal Street, Reza Alley NO.4

Tehran, 1389716791, IRAN

TEL: +98-21 44545370-5

ISRAEL

Halilit P. Greenspoon & Sons Ltd.

8 Retzif Ha’ alia Hashnia St.

Tel-Aviv-Yafo ISRAEL

TEL: +972-03-6823666

SAUDI ARABIA

Khaldi Est.

P.O. Box 3475 Abdul Malik Bin Marwan St

11471 Riyadh, SAUDI ARABIA

TEL: +966-1-219-5050

TURKEY

Atempo Ses ve Isik Sistemleri Ltd. Sti.

GUVENLIK SISTEMLERI LTD. STI.

AHL SERBEST BOLGESI A BLOK NO: 28 YE

34830 Istanbul, TURKEY

TEL: +90 212 288 0612

NORTH AMERICA

CANADA

Roland Canada Ltd. (Head Offi  ce)

5480 Parkwood Way, 

Richmond B. C., V6V 2M4, CANADA

TEL: +1 (604) 270 6626

Roland Canada Ltd. (Toronto Offi  ce) 

170 Admiral Boulevard 

Mississauga ON L5T 2N6, CANADA

TEL: +1 (905) 362 9707

MEXICO

Roland Corporation U.S.

5100S. Eastern Ave. Los Angeles, 

California 90040, USA

TEL: +1 (323) 215-2111

U. S. A.

Roland Corporation  U.S.

5100S. Eastern Ave. Los Angeles, 

California 90040, USA

TEL: +1 (323) 215-2111

As of Sep.1, 2014 (RSG)

For the USA

DECLARATION OF CONFORMITY

Compliance Information Statement

Model Name :

Type of Equipment :

Responsible Party :

Address :

Telephone :

HT-TX01 / HT-RX01

HDMI Extender

Roland Corporation U.S.

5100 S. Eastern Avenue Los Angeles, 

CA 90040-2938

(323) 890-3700

Reviews: