Dynamic microphone
You can connect a dynamic mic here. Set the [PHANTOM] switch
“OFF.” Connect it to the MIC jack via an XLR type, TRS type, or TS type
plug.
Condenser microphone
You can connect a phantom-powered condenser mic here. Set the
[PHANTOM] switch to “48V.” (Phantom power: DC48 V, 6 mA Max)
Connect it to the MIC jack via an XLR type plug.
Headsets
If a headset is connected, the headset’s mic is used (p. 6).
* Headsets equipped with a CTIA-type 3.5 mm mini-plug (4-pole) are supported.
Internal mic
If a mic (including a headset mic) is not connected, the internal mic
is used (p. 2).
Adjusting the mic sensitivity
Use the [MIC] knob to adjust the mic’s sensitivity.
While watching the level meter in the app, adjust the level so that
it does reach the maximum.
8
Summary of Contents for Go:Livecast
Page 44: ...Roland Corporation...
