Roland Edirol PCR-80, Owner'S Manual

Page: 121 / 184

121
Basic operation
Memory mode (MEMORY)
This mode lets you recall one of the stored memory sets into the current memory (p. 148).
When the PCR-30/50/80 is shipped, its internal memory contains sixteen different settings.
For details on the contents of each memory number, refer to
“Memory sets” (p. 164).
If you edit the controller settings of a memory you recall, and want to keep your changes, you must
save the memory before powering down the PCR-30/50/80. For the procedure, refer to
“EDIT-Save” p. 148.
For details on customizing (editing) the controller settings, refer to “Edit mode (EDIT)” (p. 125).
fig.memory-1_80
1
Press the
[MEMORY]
button.
The [MEMORY] button will light. The display will indicate the memory number that you selected
most recently.
2
Use the [DEC][INC] buttons or the [0] – [F] keys of the keyboard to specify the
memory number that you want to recall.
3
Press the [ENTER] button.
The setting will be cancelled if you press another button instead of the
[ENTER]
button.
The memory has now been recalled.
1 2
3