background image

19

Pen cap rubber

orientation

Plotting distance

(with our standard paper)

Pen cap rubber

orientation

Plotting distance

(with our standard paper)

32 Color Plotter Pens

Features

Variety of colors and shades for colorful expression

Optimum for illustrations, graphs and graphics

Fiber pen tip for simple use

Two pen tip thicknesses - 0.3 mm (0.0118") and 0.6 mm

(0.0236")

Following pen colors available:

Pen cap rubber

orientation

Plotting distance

(with our standard paper)

0.3 mm  : 400 m

(0.0118":15748")

0.6 mm  : 300 m

(0.0236  :11811")

Features

The pen tip is a ceramic tube, with ink flowing through it to

form the line

Because pen tip diameter is uniform, line thickness is uniform

from start until the ink runs out

Pen widths of 0.25 mm (0.00984"), 0.35 mm (0.0138"), 0.50

mm (0.50 mm), and 0.70 mm (0.0276") are available, allowing

use for  plots or business graphics.

Water-soluble ink  available in eight colors (black, red, blue,

green, orange, pink, brown and purple)

NOTE

Because these are dye-based inks, plots made with these pens

will fade if left exposed to sunlight for long periods.  Store

plots made using these pens out of direct sunlight.

Water Based Fiber Tipped Pen

Water Based Fiber  Tipped

Features

Excellent coloration for colorful illustrations

Comes in eight colors (black, red, blue, green, brown, purple,

pink, orange), and two pen tip thicknesses (0.3 mm (0.0118") and

0.6 mm (0.0236"))

NOTE

Long-term use will cause the pen tip to wear, causing a gradual

increase in line width.

Because these are dye-based inks, plots made with these pens will

fade if left exposed to sunlight for long periods.  Store plots made

using these pens out of direct sunlight.

Applicable paper

Short

Pen type

High-quality paper, tracing paper

0.25 mm  : 2000 m

(0.00984":78740")

0.35 mm  : 1300 m

(0.0138"  :51181")

0.50 mm  :  700 m

(0.0197"  :27559")

0.70 mm  :   400m

(0.0276"  :15748")

0.3 mm  : 400 m

(0.0118":15748")

0.6 mm  : 300 m

(0.0236"  :11811")

Applicable paper

Pen type

Short

High-quality paper, coated paper, tracing paper

water based OHP film

Applicable paper

High-quality paper, coated paper, tracing paper

water based OHP film

Short

Pen type

NOTE

Long-term use will cause the pen tip to wear, causing a

gradual increase in line width.

Because these are dye-based inks, plots made with these pens

will fade if left exposed to sunlight for long periods.  Store

plots made using these pens out of direct sunlight.

Black Brown  Red

Yellow Green  Blue

Violet 

Magenta 

Dark Brown 

Mahogany

Poppy Red 

Golden Yellow 

Forest Green 

Cobalt Blue

Dark Purple 

Purple

 Grey   

 Pine 

Orange

Lime Green 

Kelly Green 

Sky Blue

Mauve 

Rose Pink

Warm Grey

Beige

Peach 

Lemmon Lime

Olive Green

Ice Blue

Turquoise 

Pale Pink 

Standard Ceramic Pen

Summary of Contents for DXY-1150A














































Reviews: