9
Setting Up the
Stands
1
To prevent interference with the arm when it moves, do not place any objects in the shaded area
shown below.
30 mm (1-3/16")
To Use the DXY Horizontally
1
2
Install the left and right stands included with the
plotter.
To prevent interference with the arm when it
moves, do not place any objects in the shaded
area shown below.
To Use the DXY Upright
Never install this unit in any of the following situations, as it could result in damage:
• Do not install the unit on an unstable surface.
• Places with excessive electrical noise.
• Places with excessive humidity or dust.
• The unit and AC adapter become hot during use. Avoid installation in an are a with poor
heat-radiating characteristics (poor ventilation).
• Avoid subjecting the unit to severe vibration or shocks.
• Places exposed to strong illumination or direct sunlight.
100 mm (3-15/16")
