Roland Duo-Capture UA-11, Owner'S Manual

Page: 17 / 36

17
Basic Use
Connecting the External Equipment to DUO-CAPTURE
The [COMPUTER/TAB] switch located on the bottom panel needs to be
placed at the setting that’s appropriate for the device to which you’re
connecting the DUO-CAPTURE.
Switch position Connected device
TAB For connecting an iPad. Refer to “Using the DUO-CAPTURE
with an iPad” (p. 17).
Driver installation is not necessary.
COMPUTER For connecting a computer. Refer to “Using the DUO-
CAPTURE with a Computer” (p. 17).
You must install the driver in your computer.
Using the DUO-CAPTURE with a Computer
2
1
Bottom panel
Rear panel
1.
Set the DUO-CAPTURE’s [COMPUTER/TAB] switch to the “COMPUTER” position .
2. Connect the DUO-CAPTURE to the computer .
MEMO
If you want to connect the DUO-CAPTURE to a computer in which the USB driver has not been
installed, disconnect the DUO-CAPTURE’s USB cable from the computer, and install the USB driver
in the computer as described in the section “Driver Installation” in the DUO-CAPTURE owner’s
manual.
Using the DUO-CAPTURE with an iPad
Before you continue, please make sure to access the following URL and check the operating
requirements and other relevant information.
http://www.roland.com/support/