Roland Classic C-200, Owner'S Manual

Page: 35 / 52

35
Additional Convenient Functionality <Advanced Operation>
To listen to your new (or a previously recorded) song, proceed as follows:
1.
Press the [PLAY/PAUSE] piston (it lights) to start
playback.
To temporarily stop playback, press [PLAY/PAUSE]
again (the piston flashes). Press it again to resume play-
back from where you halted it.
2.
Press the [STOP] piston to stop playback and return to
the beginning of your song.
The [PLAY/PAUSE] piston goes dark.
The recorded song data are transmitted to the C-200’s
MIDI Out port.
At first, the C-200 uses a temporary memory for the data you record. That memory is erased when you redo your recording,
load another song or when you switch off the C-200. Therefore, you need to save recordings you want to keep and play back at a
later stage. To this end, the C-200 provides a USB Memory port located on the rear panel. The C-200 allows you to save up to 99
songs to an optional USB memory.
1.
Insert the optional USB memory into the C-200’s USB
Memory port.
Carefully insert the USB memory all the way into the
port until it is firmly in place.
2.
Hold down the [REC] piston until the [STILL
GEDACKT 8] (ENTER) tilt tab starts flashing.
3.
Enter a number between “01” and “99” using the
PEDAL and MANUAL I tilt tabs.
See the numbers on the tilt tabs. (The [USER/ORCH]
(“10”) tilt tab is used to enter the number “0”.)
Example: To enter “01”, press the [USER/ORCH] and
[SUBBASS] tilt tabs. The [USER/ORCH] (“10”) and
[SUBBASS] (“1”) tilt tabs flash sequentially to indicate
that you have entered the value “01”.
To enter “39”, press [USER/ORCH] (“3”) and [TRUM-
PET] (“9”) in that order. The [USER/ORCH] (“3”) and
[TRUMPET] (“9”) tilt tabs flash sequentially.
A similar flashing pattern is also used for any other
number you select here.
The C-200 uses the number you selected as file name to
save your song to the optional USB memory.
Never remove a USB memory while the C-200’s power is
on. Doing so may corrupt the C-200’s data or the data on
the USB memory.
4.
Press the lower part of the [STILL GEDACKT 8]
(ENTER) tilt tab to save your recording.
The C-200 saves the song, and the tilt tabs of the last con-
figuration you have been using light. The song is saved
to the “C200/SONG” folder on the USB memory. If that
folder does not yet exist, it will be created automatically.
Playing back your recorded song
Saving your song to an optional USB memory
1 2 3 4 5 6 7 8 9 0
C-200_e.book Page 35 Monday, April 4, 2011 5:22 PM