
Roland CD-2i Workshop
Roland Corporation US Page 2
CD-2i Overview
The CD-2i combines advanced recording technologies with a well-designed operating
system, resulting in an easy-to-use device that produces professional recording results
with a minimum of technical knowledge or skill. CDs produced by the CD-2i can be
played on virtually any CD player.
Music Training Tools – (Music Tutor Features)
The CD-2i is designed for use by musicians and music educators. To support those
users the CD-2i features a complement of features for rehearsal and practice:
•
TUNER
The CD-2 provides tuning support for instrumentalists in two different ways:
1. A chromatic tuner with automatic pitch identification. Just play the tuning
note . . . the CD-2i will identify the note’s pitch in the display and indicate
whether the note being played is sharp or flat.
2. Audible Tone Tuning. The CD-2i can generate tuning tones (default pitch
is A440) for reference in tuning acoustic instruments. Choose from 25
notes, and non-standard (other than A-440) tuning references are
possible as well.
•
A/B REPEAT
This feature may be utilized for both CD AND SD playback. Ideal for student
practice, choral and instrumental rehearsals, and for transcription.
•
METRONOME
The CD-2i features a built-in metronome with choice of three tones and a variety
of choices for beat emphasis (time signatures).
•
FINE TUNING (Pitch)
Playback from CDs and SD card may be accurately adjusted to match the tuning
(pitch) of other instruments.
•
KEY CHANGE (Pitch)
You may raise or lower the ‘key’ of CD and SD card playback as necessary.
•
TEMPO CHANGE
You can play music from a CD or the SD card and change playback speed
without changing the pitch. Speed is adjustable from 50% to 125%.
•
CENTER CANCEL
Center cancel eliminates, or greatly reduces, the vocalist or lead instrument
during playback of most CDs or SD music files.
Range of Applications
The CD-2i features built-in stereo microphones and speakers as well as additional inputs
for external microphones and a line level and phono level input. The CD-2i may be
connected to other instruments or amplification by use of its line output. This makes the
CD-2i a self-supporting unit that can be creatively utilized with any instrument, electronic
or acoustic (brass, wind, voice, percussion, etc.). Because of this comprehensive design
the CD-2i can be utilized in many ways: