8
[16] [1] thru [2]
Sets Off Step mode as follows:
1
Rest (Default)
2
Skip
This is a touch-type ribbon controller that emulates a pitch bend wheel. It will also play a preview sound when
the
is not connected to a controller, and is also used to adjust settings in various modes.
This is a touch-type ribbon controller that emulates a modulation wheel. It is also used to adjust settings in
various modes.
The LFO section can be used to create cyclic changes (modulation) in the sound over time, by applying a Low
Frequency Oscillator (LFO).
RATE Slider
This determines the speed of the LFO, or how fast the cyclic changes take place.
DELAY TIME Slider
This determines how long it takes before the LFO kicks in after playing the sound.
WAVEFORM Knob
This selects the waveform used for the cyclic changes. The options for this are:
▫
SINE
▫
TRIANGLE
▫
SAWTOOTH
▫
SQUARE
▫
RANDOM (RND)
▫
NOISE
The VCO MOD section can be used to vary the sound by modulating the VCO (Voltage Controlled Oscillator).
LFO MOD Slider
Adjusts the depth by which LFO modulates the VCO
ENV MOD Slider
Adjusts the depth by which ENV-1 modulates the VCO
FREQ MOD Switch
This selects the VCO that is modulated by the LFO MOD or ENV MOD sliders. The options are:
1
VCO-1
2
VCO-2
1+2
Both VCO-1 and VCO-2
2a
2b
3
4
