Roland Boutique A-01, Faq

Page: 1 / 5

1
Roland Boutique A-01 FAQ
Q&A
I cannot transmit the data using a micro USB cable.
2
When entering a pattern into the A-01, pressing the [1]–[4] buttons sometimes does not turn steps on/off.
2
When I operate a control change that’s assigned to a controller of the A-01, the sound of the internal synth also changes.
2
How do I use the Bluetooth function of the A-01?
2
Can I make a backup of the A-01’s patches, tones, patterns, and system settings?
3
When using the A-01 with a computer, must I install the USB driver?
3
Can power be supplied to the A-01 from a source other than batteries?
3
What types of device can the A-01 be connected to via Bluetooth?
4
The pitch of the A-01’s internal synth is slightly wrong; can I adjust it?
4
I want to use multiple A-01 units via Bluetooth, but their names are identical so I can’t distinguish them.
4
I can’t synchronize the A-01 with an external device and start/stop the step sequencer.
4
A device connected to the A-01’s CV/GATE jacks sometimes fails to sound.
4
Can I enter notes into the step sequencer without using the A-01’s keyboard.
5
I’d like more details about the MIDI messages that the A-01 can transmit and receive.
5
I’d like assign SysEx to the A-01’s controllers, but I don’t know how to specify SysEx.
5
I’d like to know about the MIDI signal flow within the A-01.
5
Can the MIDI channel of the keyboard (K-25m) be changed from the A-01?
5
Copyright © 2016 ROLAND CORPORATION
02