background image

12

Sep. 2012

A-49-BK, A-49-WH

Test Mode

Items Required

• Computer

• Expression pedals (EV-5, etc.) x 2

• MIDI sound module

• MIDI cable x 1

• USB cable x 1

• USB driver

* Obtain this from one of the following web pages, and install it on the computer 

mentioned above.

http://www.roland.co.jp/

http://www.roland.com/

Making the Connections

1.

Connect the expression pedals to the 

HOLD

 jack and the 

EXPRESSION

 

jack.

2.

Connect the MIDI sound module to the 

MIDI OUT

 connector and turn on 

the power to the MIDI sound module.

Entering the Test Mode

While holding down 

FUNCTION

 and 

TRANSPOSE

, connect the 

USB 

COMPUTER

 connector on the rear panel to a USB connector on the 

computer.

When the unit enters the Test mode, all LEDs on the panel light up.

Quitting the Test Mode

Disconnect the USB cable.

Skipping Test Items

Test items cannot be skipped.

LED Test

Verify that all LEDs are lighted, then press the key for the highest note 
(C6).

* Pressing the lowest note (A0) here lets you skip steps

 

1

 and 

2

 of 

D Beam Test

 

(setting the lowest and highest positions of the D Beam).

Note, however, that when the main board or panel board has been 
replaced, this must not be skipped. In such cases, be sure to press the 
highest note (C6).

Switch Test

Press the lighted button.

The pressed button goes dark and the next button lights up.

When all buttons have been pressed and no problem has been found, 
execution automatically advances to the next test item.

Keyboard Test

Slowly and lightly press all 49 keys.

When you have finished pressing all keys, if no problem has been found, 
execution automatically advances to the next test item.

Pedal and Knob Test

1.

Operate the expression pedal connected to the 

EXPRESSION

 jack from 

MIN to MAX.

2.

Operate the expression pedal connected to the 

HOLD

 jack from MIN to 

MAX.

3.

Operate the 

C1

 knob from MIN to MAX.

4.

Operate the 

C2

 knob from MIN to MAX.

When all pedals and knobs have been operated, if no problem has been 
found, execution automatically advances to the next test item.

Bender Test

1.

Move the bender lever from left to right, then release your grip on it.

2.

Move the bender lever (modulation lever) toward the back, then release 
your grip on it.

If no problem is found, execution automatically advances to the next test 
item.

D Beam Test

1.

Place your hand over the panel at a distance of approximately 5 
centimeters, and press the key for the highest note (C6).

The lowest position is set.

2.

Place your hand over the panel at a distance of approximately 30 
centimeters, and press the key for the highest note (C6).

The highest position is set.

3.

Move your hand closer to the panel, and verify that the uppermost LED 
of the octave indicator lights up.

4.

Slowly move your hand away from the panel.

When the highest position of the D Beam is detected, system 
initialization is automatically carried out.

When the Test mode ends, all 6 octave indicators flash.

5.

Disconnect the USB cable.

* Quitting the Test mode without carrying out the D Beam test causes the unit 

not to start up in the normal mode. Be sure to perform the D Beam test. If the D 
Beam test cannot be accessed, the D Beam is faulty. Replace the part and test it.

Summary of Contents for A-49-BK




















Reviews: