background image

WARNING

 

All long loads such as (but not limited to) Canoes, Kayaks, Sailboards, Paddle

Boards and Construction materials must be tied down to the front and rear
bumpers or tow hooks. All loads must be secured with non-stretch straps.

Cross Bars are not for off road use, use on trailers or towed vehicles.

Be aware of the carried load width and height as these can affect car handling,

parking garage use or other vehicle height restrictions. Users are responsible for
understanding and obeying government laws where they drive.

Do NOT use ROLA cross bars and accessories for purposes other than what they

are intended for or exceeding stated load limits. Failure to do so will voidall
warranties.

All ROLA locks should be turned and lubricated periodically. Locks are intended

to deter theft but are not theft proof, please remove valuable gear if left
unattended. Place a spare key in the glovebox or some secure area.

Check and replace worn out or defecive parts.

The load carrier should always be cleaned and maintained, especially in

the winter.

Screws, nuts and locks (if fitted) should be lubricated at regular intervals.

When not in use, the product should be removed from the vehicle.

When the product is removed from the vehicle, all loose parts should be

stored safely.

Road speed should always be adjusted to suit the load being carried and the

current driving conditions such as road type and quality, wind conditions, traffic
intensity and applicable speed limits.

Note that the vehicle’s total height increases when upright loads are carried.

The vehicle’s driving characteristics and braking behavior change and it’s

vulnerability to side winds increases when a load is  carried on the roof.

Products fitted with a lock should always be locked during transport.

The proper attachment of this product in accordance with the enclosed instructions is critical to its proper performance. See instructions  for 
proper attachment, proper usage, and important safety messages. Cequent Consumer Products, Inc. has no control over, or  responsibility 
for, the attachment or the installation. Cequent Consumer Products, Inc. is NOT responsible nor will it be held liable for any  damage 
resulting from its attachment or improper use. Cequent Consumer Products, Inc. shall not be liable for any claims of any kind  greater than 
the purchase price of the product. Warranty information available upon request.

 

NOTICE

: Your cross bars will not prevent property damage that may result from improper loading, securing, or driving.

 

PAGE 3 

Review all Warnings, Instructions, and Warranty information carefully.   
Failure to follow these warnings and instructions will void the Warranty.

 

Summary of Contents for 59972















Reviews: