manualshive.com logo in svg

Roksan Audio Xerxes.20plus, User Manual

Share
Download
Roksan Audio Xerxes.20plus User Manual Download Page 15

Roksan Audio ltd

  

Xerxes.20

plus

 Record Player User Manual 

 

 

General Use 

 

 

Version 2.00 

All specifications are liable to change without notice. E&OE

 

Page 15 of 22

 

ENGLISH

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Drive Belt Set-up and Maintenance 

 

 
2 

The Motor/Pulley axis can also be aligned just as the Main 
Bearing/Inner Platter axis. See above 

3 

If the levels are adjusted but the drive belt rides a little too high, 
then remove the belt and gently stretch it. Wait a couple of 
minutes and refit the drive belt and the outer platter and check the 
running position again (Repeat this process if necessary) 

 

View from B 

BELT WOULD RIDE SLIGHTLY 
HIGHER ON THE PULLEY 

View from A 

Motor Pulley & Inner/outer platter 
alignment 

A 

A 

2.5mm A/F  ALLEN KEY 

BELT WOULD RIDE SLIGHTLY 
HIGHER ON THE PULLEY 

BELT WOULD RIDE SLIGHTLY 

LOWER ON THE PULLEY 

Summary of Contents for Xerxes.20plus























Reviews:

No comments

Brands by name

Popular brands

Load more brands