3
Oxygene CD Player with a separate D/A converter, connect this to either the RCA
socket or the TOSLINK socket. DO NOT connect to both sockets at the same time
as this could degrade sound quality.
Power cord
The separate power cord supplied connects to the 3-pin power socket on the
rear panel. Make all connections before fitting the mains power cord.
ON/OFF
Press the ON/OFF button on the back of the Oxygene CD Player to power it up.
Standby
You will notice that the Oxygene products do not have a standby function. This
is because we constantly strive to make our products as environment – friendly
as possible; and the best way to save on electricity is to turn off the unit when
not in use. Furthermore, as stated these units do not require a warm up time.
Many audio products require a long warm up period in order to perform at their
best. This is not the case with the Oxygene series, since these units have been
designed using the latest digital technology.
Mains Voltage
The correct AC mains voltage is printed on the label situated on the bottom of
the unit. Make sure your AC mains voltage is for a specific voltage and will only
work with that voltage (±10%).
Three versions of the Oxygene CD players are available:
100 V 50/60Hz, 120 V 50/60 Hz and 230V 50/60Hz.
In case you move to a country that has a different AC supply voltage, contact
your Roksan authorized distributor, for a professional conversion to the new
supply voltage.
Cables
Use the ROKSAN interconnect cables. We cannot emphasize this enough.
As better components and systems are developed, it becomes increasingly
important to avoid the limitations of inferior system interconnections.
