Leveling – Bio dispenser
Enter the
[New Creator K APP] > [Bed Leveling] > [RIGHT POSITION]
Click the
[HOME]
button to adjust the distance from a nozzle and a bed.
After clicking the
[SET HOME POSITION]
, choose the distance to move among
[0.1MM], [1MM]
and
[10MM]
After selecting the moving distance you want, click up and down arrows to adjust the distance between an output bed and a nozzle, up
to the properties such as viscosities of materials.
The thickness gauge provided will be helpful for this.
Click the
[FINISH]
button.
1
2
3
4
5
6
HOW TO USE
HOW TO USE
Leveling – Bio extruder
Enter the
[New Creator K APP] > [Bed Leveling] > [LEFT POSITION]
Click the
[HOME]
button to adjust the distance from a nozzle and a bed.
After clicking the
[SET HOME POSITION]
, choose the distance to move among
[0.1MM], [1MM] and [10MM]
After selecting the moving distance you want, click up and down arrows to adjust the distance between an output bed and a nozzle, up
to the properties such as viscosities of materials.
The thickness gauge provided will be helpful for this.
Click the
[FINISH]
button to finish leveling.
TIP :
Before leveling, adjust the left extruder to make the extruder is parallel to the dispenser, or adapt the height of the extruder higher
than the dispenser. If the layer is 0.2mm, using 0.1mm thickness gauge is recommended for leveling. In the following printing,
the height you have set will be the offset value of the nozzle.
1
2
3
4
5
6
TIP :
In the following printing, the height you have set will be the offset value of the nozzle.
Summary of Contents for Invivo
Page 1: ...USER MANUAL ROKIT ...