NOTE :
Please make sure the printer got TURNED OFF when you connect the printer with temperature control box.
Turn power of the printer on after the circulation of coolant.
Make sure all valves are open before you turn the temperature control box on.
How to use Temperature Control Box (Premium)
Open the lid of the control box, and pull 6 bottles of INVIVO Liquid(Coolant).
Close with silicon lid(provided) after 10 seconds of circulation of coolant.
Set the temperature of bed and syringe, and press
[SET]
button.
When you are done using with temperature control box, do not immediately turn off the power.
Lower or upper the temperature up to 25-30 celcius, and let the temperature setted, then turn the machine off.
1
2
3
4
HOW TO USE
TIP :
If you skips 4th process above, the internal elements may be overloaded, which may cause malfunction.
Replacement term of INVIVO@COOLANT is 1 year.
TIP : The maximum pressure is 9bar(900kpa).
When you have ooze while your printing, Hold [VACCUM] which is on the Air Dispenser Controller.
HOW TO USE
How to use Air Dispenser (Premium)
Before using the Air Dispenser, press
[SETTING] > [OPTION]
, and press
[ON]
on the ‘Dispenser Type(Bio INVIVO)’
After unscrewing the barrel fixture, fill the stainless barrel(10cc) with the material will be used.
After mounting the precision nozzle on the barrel, install it in the machine, and screw the barrel fixture.
Set the preferred temperature at the Air Dispenser Controller(max~350 celcius)
Wait for the material to be melted, about 20-30 minutes, and then press
[SHOT]
for checking whether the material comes out.
1
2
3
4
5
Current Temperature
Target Temperature
SET Button
Temperature Controller
Vacuum
Temperature Controller
Requlator
SHOT Button
Summary of Contents for Invivo
Page 1: ...USER MANUAL ROKIT ...
