Installation of
Dr. INVIVO 4D2D Accessories
The following process includes insertion of NFC
Tag, installation of Dispenser 1, installation of 3D
Regen PCL Holder and attachment of Bed Film.
1. Using the NFC Tag
A.
Remove packaging of NFC Tag and insert into
the NFC reader.
2. Installation of Dispenser 1
A.
Remove packaging of Dispenser 1 and check
for any damage.
B.
Insert the Dispenser 1 into the Dr. INVIVO
4D2D.
3. Installation of 3D Regen PCL Holder
A.
Remove packaging of 3D Regen PCL Holder
and check for any damage.
B.
Insert the 3D Regen PCL Holder in proper
position.
C.
Insert the end of PCL (about 10~20mm) into
the insertion hole above the Dispenser 1.
D.
When inserting PCL, check whether it is
automatically loaded into Dispenser 1.
4. Attachment of Bed Film
A.
Remove sterile packaging of Bed Film and
check for any damage.
B.
Remove the release paper from the Bed Film
and attach on to the center of the Matrix Plate
without air bubbles.
C.
Stably attach the Matrix Plate with Bed Film
into Dr. INVIVO 4D2D.
NFC Tag
3D Regen PCL
3D Regen PCL Holder
Dispenser 1
Bed Film
Dispenser 2
Dispenser 2 Cap
Dispenser 2 Tip
Dispenser 2 Tube
Dr.INVIVO AI Regen KIT Manual
EUARK002_Ver.1.0.0
Summary of Contents for Dr. Invivo AI Regen KIT
Page 1: ...Vol 1...
Page 4: ...Dr INVIVO AI Regen KIT Manual EUARK002_Ver 1 0 0...
