Rokit Dr. Invivo AI Regen KIT, Manual

Page: 5 / 8

Getting Started
Preparation of Bioink (Adipose Tissue)
Follow the instructions below to prepare the
adipose tissue for bioprinting.
The following process includes adipose micronization
and washing step.
1. Adipose Tissue Micronization
Following the instructions using 4 Adipose
Micronizers from ① to ④ in order.
A. Remove packaging of Adipose Micronizer and
check for any damage.
B. Attach the luer-lock syringe that contains
the adipose tissue to the Left of the arrow (▶)
marked on the side of the Adipose Micronizer
① and attach an empty luer-lock syringe to the
opposite side.
C. Alternately push the plunger of the syringes
that are each attached to the opposite sides of
the Adipose Micronizer ① so that the adipose
tissue can pass through the Adipose Micronizer
① at least 3~5 times in the direction of the arrow
(▶) marked on its side.
D. Transfer the adipose tissue so that the
micronized adipose tissue can finally be
contained in the syringe on the Right side of the
arrow (▶) and then remove the syringe from
Adipose Micronizer ①.
Attach the luer-lock syringe that contains the
adipose tissue to the Left of the arrow (▶)
marked on the side of the Adipose Micronizer
② and attach an empty luer-lock syringe to the
opposite side.
E. Alternately push the plunger of the syringes
that are each attached to the opposite sides of
the Adipose Micronizer ② so that the adipose
tissue can pass through the Adipose Micronizer
② at least 3~5 times in the direction of the arrow
(▶) marked on its side.
F. Transfer the adipose tissue so that the
micronized adipose tissue can finally be
CAUTION:
Do not use in case of damage to sterile
packaging of the product components.
NOTE:
Prepare at least 4 luer-lock syringes (10~30cc)
Dr.INVIVO AI Regen KIT Manual EUARK002_Ver.1.0.0
This product is consisted of Adipose Micronizer,
the fat separator device and the accessories.
1. Adipose Micronizer ①
Adipose Micronizer ②
Adipose Micronizer ③
Adipose Micronizer ④
2. Dispenser 1
3. 3D Regen PCL
3D Regen PCL Holder
4. Bed Film
5. Dispenser 2
6. Dispenser 2 Cap
7. Dispenser 2 Tip
8. Dispenser 2 Tube
9. NFC Tag (Packaged with Dispenser 1)
1
5
7
8
9
2 3
4
Dr. INVIVO AI Regen KIT
Components
6