21
3DISON PRO
User Manual V.1
E. Making a print with CreatorK 8
E2. How to use CreatorK 8
④
Feedrate (mm/s)
This shows how fast the extruder moves per second when it prints. You can choose between 20 and 1000.
The lower the speed, the less the vibration and the output has smoother surface. The speed of 80~100 is
recommended.
⑤
Travel Feedrate
This shows how fast the extruder moves per second when it does not print. The same number of feed rate
is recommended.
⑥
Print Temperature
This determines the extruder’s temperature at which the filament is melted. The temperature is variable
depending on the materials. 205-215
℃
for PLA, 235-250
℃
for ABS.
⑥
Heat Bed Temperature
70-80
℃
for PLA, 145-150
℃
for ABS.
When you use different diameter of filaments, you should input corresponding diameters.
Material
Default
Click ‘Set Default Value’ if you want to change values which were changed in Advanced
Settings to initial set value.
It indicates nozzle’s diameter. ∃DISON PRO applies 3 different nozzle diameters :
0.2mm, 0.4mm and 0.6mm. You should select corresponding diameters when using
different nozzles.
Extruder
4. After setting all the options, click generate G-code
button which is at the bottom of the pop-up. And
then you can see G-code build process screen. This
process is a slicing process enabling 3DISON to 3D
print the STL 3D image.
5. Once finished this work, SD card icon color will
change, indicating G-code has been generated suc-
cessfully. And then click the SD-Card button to save
the file in the SD Card.(.x3g)
