rojaflex WSR-1, Original Assembly And Operating Instructions

Page: 8 / 12

1. Programming mode - radio receiver or radio motor
Set the receiver (external Rojaflex radio receiver or Rojaflex radio motor) on which the handheld transmitter
is to be programmed to programming mode (see receiver instructions).
2. Programming the wall transmitter - WSR-1
Each keystroke must be executed within 4 seconds!
Otherwise, the system automatically exits the programming mode.
SI BI
Op
en
-
Cl
os
e
UP
Set receiver (motor / external
receiver) to programming
mode according to instruc-
tions.
Press P2 programming key
(rear) 2 times.
Press UP key 1 x
press.
The motor (shutter) briefly
moves UP/DOWN and/or the
receiver beeps.
OK!
First code programming suc-
cessfully performed.
Then check the function by pressing the UP / STOP / DOWN keys.
If the direction of rotation of the motor is reversed (roller shutter / motor moves downwards when
the UP key is pressed), please start from the beginning and press the DOWN key after the P2 key
instead of the UP key!
This changes the direction of rotation of the motor.
Changing the direction of rotation of the motor is only possible, depending on the motor
type, if the end positions of the motor have not yet been programmed!
8
www.rojaflex.com
Programming and settings