background image

16

SIENA

Digital electronic water heater

 7.6.1. Main Menu: Settings sub-menu

The `Settings´ sub-menu configures the technical parameters of your product. 
To access, select the 

 icon displayed in the Main Menu screen and press 

 to confirm.

Use the 

 and 

 buttons to move across the different options on the 

sub-menu to choose your parameter and press 

 to access.

The below icons displayed on the screen take you to the following parameters:

Display 

backlight 

brightness

Clear Memory

Language

Time

• 

Adjust display backlight brightness

This allows you to change the brightness of the display panel in both the 
STAND-BY and ON modes separately. To change the brightness of the display 
panel ensure the  

  icon is highlighted and press the 

 button to confirm. 

Then with the 

 and 

 buttons you can switch between the two modes.

With the 

 and 

 buttons you can increase or decrease the brightness 

as you wish. The cursor indicates the intensity of the light. Once you have set 
the required brightness press the 

 button to save and exit.

• 

Clear the memory

This allows you to clear any information saved in your product. To clear the 
memory ensure the  

  icon is highlighted in the `Settings´ sub-menu and 

press the 

 button to confirm.

The display panel will show when completed and the language will change 
to default.

Summary of Contents for SIENA









































Reviews: