Rointe ERKO foil, Instruction & Installation Manual

Page: 12 / 52

12
11. CONTROL CARD
Date Signed Name or company stamp
Attention:
Do not cut or shorten the heating element.
Ensure that the entire heating elements including the joints are installed under the tiles in the installation.
The heating element must be used in conjunction with a 30mA RCD.
Model Resistance before Resistance after
Insulation
resistance pass
Floor sensor
resistance
CAUTION
Electric floor heating systems.
Risk of electric shock.
Electric wiring and heating panels contained below
the floor. Do not penetrate with nails, screws, or similar
devices. Do not restrict the thermal emission of the
heated floor.
This form must be completed as part of the Rointe Guarantee. Ensure that the values are as per the
instruction manual.
This card must be situated close to the consumer unit in a visible place.
Note: Draw a plan showing the layout of the heating mat.
Rointe UK & Ireland | T (UK): 0203 321 5929 | T (IE): 015 530 526 | E: support@rointe.co.uk
www.rointe.co.uk | www.rointe.ie
Heating mat location
Total wattage
EN