Charging base use
Place the charging base on a level ground and place the appliance on the charging base vertically and then charge it after
powering on.During the charging process, the fan will be automatically turned on to dry the roller brush (the fan will continue to run for
about 3 hours and then stop). During the air-drying process, the roller brush will automatically rotate to a certain angle every 3 minutes
(the roller will stop rotating after about 3 hours). During the operation of the fan, You can press the power button or the mode switch
button to end the drying function.
9
Low battery
The screen corresponding to the clean
water tank indicator is always on
The corresponding waste water tank indicator
on the screen keeps flashing. The waste
water tank to be detected is not full, and the
status light is off.
The indicator light corresponding to the
waste water tank on the screen is always on,
and goes out after the installation of the
waste water tank is detected.
The corresponding self-cleaning status
indicator on the screen is always on, and
goes out after the program ends
Condition
Screen Tips
Condition
Screen Tips
Clean water tank is
short of water
Waste water tank full
Waste water tank not
in place
Self-cleaning start
The screen corresponds to the battery
indicator flashing
WiFi enabled pairing
WiFi disconnected
WiFi connected
Voice prompts off
Voice prompts on
The corresponding WiFi indicator on
the screen is flashing and flashing
The corresponding WiFi indicator on
the screen is off
The corresponding WiFi indicator on
the screen is on
The corresponding voice indicator on
the screen is off
The corresponding voice indicator on
the screen is always on
