Roidmi XDJ07RM Operation Manual Download Page 4

4

4. After using the machine, please clean the waste water tank in time, keep the ventilation path unobstructed, to avoid blocking 
the suction power and the motor heating, which will affect the service life of the appliance;
5. Please use a dry cloth to clean the dust on the plug regularly to avoid fire due to poor insulation and other reasons;
6. If you do not use the appliance for a long time, please make sure to charge it at least once a month to avoid serious damage to the 
battery due to lack of power;
7. Before disposing of the appliance, please take out the battery from the machine;
8. Before removing the battery, be sure to turn off the power to the appliance and operate it. Please place the removed battery properly;
rotate the display cover clockwise,you can open the display, unplug the display cable, remove the display, then use a screwdriver to 
remove the 4 screws of the battery cover, and remove the battery cover, unplug the battery connection line, then the battery pack 
can be taken out;
9. Please turn off the power before cleaning the appliance;
10.Do not run the brush on the power cord. 

Storage

1. Please keep the floor appliance away from the electromagnetic equipment of the hospital;
2. Keep the charger away from all heat sources;
3. After using the appliance, please store it in a dry and cool place;

If the appliance fails, please contact the after-sales personnel, do not repair by yourself to avoid 

danger;If you need to transport or mail it , please pour out the liquid in the clean water tank and 

waste water tank, and wipe both water tanks to prevent backflow and causing damage the appliance;

SAVE THESE INSTRUCTIONS

Household use only

Scope of use of the appliance

1. This appliance is suitable for hard floors in indoor environments, including waxed floors, stone floors, rubber floors, marble floors, 
granite floors,terrazzo floors, solid wood floors, composite floors, bamboo floors various mirror tiles, porcelain tiles and other flat 
surfaces. If it is not bumpy when using this product on a flat ground surface, the best results may not be achieved;
2. Do not use this product near working fireplaces or heaters to prevent deformation of the machine shell;
3. Do not pick up high-temperature substances (unextinguished cigarette butts, matches or hot ash, etc.), ultra-fine substances (such 
as lime, cement, wood chips, gypsum powder, ashes, etc.)carbon powder, etc.) dangerous goods (such as solvents, descaling agents, 
etc.), chemical substances (such as acidic substances, detergents, etc.) and other substances with uncertain physical properties;
4. Do not use this appliance to pick up sharp objects, such as glass pieces, small toys, pins, paper clips, stones, plaster, large pieces of 
paper, etc as they may cause blockage and damage the machine;
5. Stains with strong grease, strong stickiness or strong dyeing properties such as shoe polish, paint, paint, etc., are not within the 
scope of use of this product;

Appliance 

1. Do not disassemble and assemble the closed parts of the appliance by yourself. There are no parts that can be repaired by the 
customer, and do not try to change the performance of the machine, otherwise it will cause danger;
2. Using a voltage that does not correspond to the specifications of this product will damage the motor and is more likely to cause 
harm to the user;
3. When cleaning the stairs, be extra cautious to prevent falling;
4. Do not shake or bump the machine up and down to prevent waste water from flowing into the motor;
5. Please do not tilt the machine to one side or lay it flat to prevent waste water from entering the motor;
6. Do not use if the clean water tank and waste water tank are not installed correctly;
7. Do not place any small objects on the air outlet,or block the air outlet. Remove the small objects that may hinder the smooth air flow 
of the air outlet to prevent the machine from overheating;

Other

1.The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience 
and knowledge, unless they have been given supervision or instruction;
2.Children being supervised not to play with the appliance;
3.The plug must be removed from the socket-outlet before cleaning or maintaining the appliance;
4.This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities 
or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way 
and understand the hazards involved;
5.Children shall not play with the appliance;
6.Cleaning and user maintenance shall not be made by children without supervision;
7.The network standby power consumption is 0.99W, the ordinary standby power consumption is 0.50W, after the machine is fully 
charged, it will enter the network standby immediately after power on or standby;
8. The WiFi module takes effect when the machine is turned on or in standby. If you want to turn off the WiFi module, you need to place 
the product on the charging base and the battery is fully charged. Press and hold the power button for 5 seconds, and the WiFi module 
will be turned off after the machine is turned off;
9.The appliance is only to be used with the power supply unit XDJCDZ01RM / XDJCDZ01RM* charging base and original factory designated 
charger;

Summary of Contents for XDJ07RM

















Reviews: