background image

13

Cordless Vacuum Cleaner Product Performance Fault List

Name

The machine cannot be started under normal use

Rolling brush does not rotate under normal operation condition

The indicator light remains the same under normal use

The APP cannot be connected under normal use

Performance Fault

Cordless Vacuum Cleaner

Product Hazardous Substances Declaration

Hazardous Substances

Part Name

Plastic Case

Circuit Board

Cable

Battery

Power Adapter

Magnet

This form is prepared in compliance with SJ/T 11364.

Pb

Hg

Cd

Cr(VI)

PBB

PBDE

Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/T 26572.

    

:Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T 26572.

This product meets RoHS environmental protection requirements;At present, there is no mature technology in the world to replace or reduce the lead content 

in 

electronic ceramics and copper alloys.The term of environmental protection marked by this product refers to that under normal use conditions, the product 
contains harmful substances or elements that will not leak out.

This Attestation implies that the examined types are in accordance with the standards designated under the Use of hazardous substances directive 
(RoHS) 2011/65/EU.

The warranty period shall take effect from the date of purchase or the date of delivery (if the delivery date is a little later than the purchase date). 
Keep your purchase invoice or relevant certificates as an important basis for the warranty service.

This policy may be updated from time to time to the extent permitted by law. For details, contact the local dealer.

Warranty Discription

Warranty Content

Main Machine

Filter

Type

Cordless Vacuum Cleaner

Warranty Content

Warranty  Time

One Year

It is random material consumption, no warranty period

Manufacturer:  ROIDMI Information Technology Co., Ltd. 

Address:

4F,C8 Buliding,No.1699 Huishan Road,Life Science and Technology Park,Huishan District,Wuxi,Jiangsu,PRC

Executive Standard: Draft EN 301 489-1:V2.2.0:2017   Draft EN 301 489-17:V3.2.0:2017   EN 300 328 V2.1.1:2016   EN60335-1:2012/A13:2017 
EN 60335-2-2:2010/A1:2013   EN 62233:2008   EN 62479:2010   EN 55014-1:2017   EN 55014-2:2015   EN 61000-3-2:2014   EN 61000-3-3:2013  

Service Email: [email protected] 
For product sales information, please check the website:www.roidmi.com/en

Made in China

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To 
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to 
promote the sustainable reuse of material resources. To return your used device, please use the return and collection 
systems or contact the retailer where the product was purchased. They can take this product for environmental safe 
recycling.

Summary of Contents for F8















Reviews: