©
Röhr
©
Röhr
7
MIG-200MI / MIG-250MI
Environment
1.
The machine can perform in environments where conditions are dry with a maximum
humidity level of 90% and an ambient temperature between -10 to +40 degrees centigrade.
2.
Avoid welding in direct sunshine or a wet/damp environment. If the machine comes into
contact with water, do not use the machine until it has been fully inspected by a qualified
professional.
3.
Do not use the machine in an environment where the air is polluted with conductive dust.
Health and Safety
Technical Data
MIG-200MI
MIG-250MI
Power Voltage (V)
Single Phase AC230V±15% Single Phase AC230V±15%
Frequency (HZ)
50/60
50/60
Rated Input Current (A)
28
36.4
Output Current MIG (A)
50-200
50-250
Output Current MMA (A)
20-200
20-250
Output Voltage (V)
16.5-24
16.5-26.5
Duty Cycle (%)
60
60
Power Factor
0.93
0.93
Efficiency (%)
85
85
Wire Machine
Compact
Compact
Wire Speed (M/Min)
2.5-13
2.5-13
Post Puff (S)
1
1
Wire Spool Diameter (mm)
150
150
Wire Diameter (mm)
0.6-1
0.6-1
Applied Welding Rod (mm)
1.6-4
1.6-5
Housing Shielding Grade
IP21
IP21
Insulation Grade
F
F
Suitable Wire Thickness (mm)
0.8 and above
0.8 and above
