Kettle R-7520
EN
5
1.
Wash the inside of the kettle and lid with mild detergent and water. Rinse
each thoroughly. Do not immerse the kettle or power base in water or any
other liquid. These items are not dishwasher safe.
2.
Fill the electric kettle with fresh water to the “MAX” water level
mark. Plug
power base into power outlet. Place kettle into power base. Turn the switch
ON by pressing down on ON/OFF switch. ON/OFF light will turn on indicating
kettle is ON. Let the water boil.
3.
When the water and unit have cooled, discard the water. Rinse with cold
water and repeat.
4.
Your electric kettle is now ready for use.
INSTRUCTIONS FOR USE
•
Position the power base on a flat, heat resistant surface, as close as possible
to a power outlet.
•
Follow cord routing in power base according to exit patterns. Proper cord
routing will result in the power base laying flat when kettle is placed in base.
DO not operate kettle if power base is not flat. If power base is not flat,
remove kettle from power base and repeat cord placement instructions.
•
To fill with water, remove the lid. Fill the electric kettle with water to below the
“MAX” water level mark. NOTE: Do not exceed the “MAX” water level mark
indicated on the electric kettle.
•
Plug the electric cord into an electric outlet. Turn the switch ON by pushing
down on the on/off switch. The indicator light will light to indicate the unit is
on. The water will heat and the electric kettle will switch off automatically
when the water boils. NOTE: Ensure the ON/OFF switch is clear of
obstructions and the lid is firmly closed. The electric kettle will not turn off
automatically if the ON/OFF switch is constrained, or if the lid is left open.
•
Carefully lift the kettle from the power base and pour the hot water.
