Kettle R-7520
EN
3
•
Remove the kettle from power base before filling or pouring. Do not attempt to
remove the kettle from the power base until it is switched off, manually or
automatically.
•
Use the kettle only with the power base supplied and vice versa.
•
Do not use appliance for other than intended use.
•
Use on a hard, flat level surface only, to avoid interruption of air flow
underneath the appliance.
•
Extreme caution must be used when handling or moving kettle and pouring
from the kettle containing boiling water.
•
Scalding may occur if the lid is removed during the heating cycle.
SAVE THESE INSTRUCTIONS
SPECIAL CORD SET INSTRUCTIONS
1.
A short power supply cord is provided to reduce the hazards resulting from
becoming entangled in or tripping over a longer cord.
2.
An extension cord may be purchased and used if care is exercised in its use.
3.
If an extension cord is used the marked electrical rating of the extension cord
must be at least 16 amps and 250 volts. The resulting extended cord must be
arranged so that it will not drape over the counter top or table top where it can
be pulled on by children or tripped over accidentally.
PRECAUTIONS:
WARNING: TO AVOID SCALDING
, handle this kettle with care as water is heating,
boiling, and cooling. The lid must remain in place during use to avoid steam burns.
Keep spout away from persons as scalding can result from steam.
1.
Place the electric kettle well back from the edge of the counter.
