8
5. Insert the frothing device into the milk about two-centimetre, froth milk in the way
moving vessel round from up to down.
6. When the required purpose is reached, you can turn the steam controller to off position to
stop generating the steam.
Note:
Clean frothing device with wet sponge immediately after steam stops generating but
care not to hurt!
7. Pour the frothed milk into the espresso prepared, now the cappuccino is ready. Sweeten to
taste and if desired, sprinkle the froth with a little cocoa powder.
Note:
we recommend you allow the maker to cool down at least for 5 min before making
coffee again. Otherwise burnt odor may occurred in your Espresso coffee.
PRODUCING STEAM TO HEAT LIQUIDS
The steam tube (without the frothing device) can be used to make hot beverages like
drinking chocolate, water or tea.
Method:
1. Open the top cover, add proper drinking water into water tank according to the gauge.
2. Close the top cover, then connect the appliance to power supply source.
3. Make sure that the steam controller is at the off position.
4. Press the
switch
Ⅰ
,
the indicator 1 is illuminated. The coffee maker begins to be
preheated. At same time Turn MODE switch to “Froth” position and keep Start/stop switch
on “stop” position.
5. Waiting for until the indicator 2 is illuminated, it shows that the preheating is finished.
6. Remove the frothing device from the steam tube.
7. Dip the steam tube into the liquid to be heated. Turn the steam controller in anti-clockwise
slowly to start making steam.
Note:
During operation, if the indicator 2 is extinguished, you must turn the steam controller
to off position (first make sure there is water in the tank), waiting for until the indicator 2 is
illuminated again, turn the steam controller knob in anti-clockwise, the steam will come out
again.
8. When the required temperature is reached (the ideal is 60ºC), you can turn the steam
controller to off position to stop generating steam.
Summary of Contents for R-974
Page 4: ...3 KNOW YOUR PRODUCT ...
