– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
Save the instruction
======================================================================
Instruction for use
1.
Before first use
，
fill the kettle with clean water to maximum capacity and boil
．
Discard the
water and repeat the process
．
2.
The kettle should always be unplugged when filling or adding water
．
3.
Fill the kettle with water to desired level
．
Do not overfill or there will be a risk of spillage
or spitting
．
The water level indicator will assist you to measure the correct amount
．
You can
fill the kettle via the spout or after opening the lid
．
Do not forget to close the lid after
filling
，
otherwise the kettle will not automatically switch off after use
．
4.
Do not fill with less than 0.5 liters of water
（
to “min” indication
）
to prevent the kettle
running dry while operating
．
5.
Do not fill with less than 1.7 liters of water
（
to “max” indication
）
．
6.
An automatic safety cut-out has been fitted for protection against overheating
，
it will
operate if the kettle is switched on when containing insufficient water
．
Always ensure the
water inside the kettle covers the minimum mark on the water level indicator gauge
．
If the
automatic safety cut-out has operated
，
switch the kettle off
，
disconnect from the power
outlet and allow the kettle to cool down for 5 to 10 minutes
．
The refill with and switch on
，
the kettle will work as normal
．
7.
Place the power base on a dry, flat surface. Place the kettle on the power base. The
electrical connection will be made automatically as the kettle slides onto the power base.
8.
Plug the cord set on the power base. The electrical connection will be made automatically
as the kettle slides onto the base.
9.
Plug the cord set into an earthed power socket and switch on by depressing the switch of
the kettle to the “on” position.
10.
When the water has boiled, the kettle will switch off automatically, after allowing the kettle
to cool down for 15-20 seconds, the water can be brought back to the boil by pushing the
switch back to the “on” position. During the cooling down time do not force the on/off
switch into the “on” position as this can damage the operating mechanism.
11.
Do not remove the kettle from the power base without switching off first.
12.
Remember, if you do not wish to re-boil the kettle, switch it off.
13.
The kettle may be switched off manually at any time by setting the on/off switch into the
“off” position
.
======================================================================
How to care for your kettle
Wipe the exterior of the kettle with a soft, damp cloth or sponge. Remove stubborn spots with
a cloth moistened with mild liquid detergent. Do not use abrasive scouring pads or powers.
Never immerse the kettle in water or other liquids.
From time to time, depended on the nature of your water supply, a boiled scale deposit is
naturally formed and can be found mostly adhered to the heating element, thus reducing the
heating efficiency.
The amount of boiled scale deposited (and subsequently the need to clean or rescale) largely
depends on the water hardness in your area the frequency with which the kettle is used.
Boiled scale is not harmful to your health. But if poured into your beverage, it can give a
powdery taste to your drink. Therefore, the kettle should be descaled periodically as
indicated below.
